Anycubic Water Wash Resin 2.0 – Translucent Red

Anycubic Water Wash Resin 2.0 – Translucent Red

Water-washable UV resin | Compatible with 365–405 nm MSLA/LCD printers | Translucent red finish for detailed prints | Rinse clean with water — no harsh solvents needed The ANYCUBIC Water Wash Resin 2.0 Translucent Red is designed for MSLA/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm, dimensionally stable, and transparent red colour. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results. Features Water-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing Compatible with 365–405 nm MSLA/LCD resin printers Translucent red transparency for display models, miniatures, and detail-focused prints Cured hardness of 82–85 HD with tensile strength of 38–43 MPa Low volume shrinkage rate of 2.2–5.5% for dimensionally accurate output Post-cure in 3 minutes at 405 nm UV (25,000–30,000 µW/cm²) Post-cured resin disposable as standard plastic waste Specifications Colour: Translucent Red (#D22630) Resin Size: 1kg Pre-print preparation: Shake well before use Print environment: 20-40 ℃ First layer exposure duration: 25-40 s Normal exposure duration: 2-2.5 s Print temperature: 20-50 ℃ Material: Hydrophilic group-modified light-curing resin Wavelength: 365-405 nm Viscosity: 190-230/mPa·s(25℃) Density: 1.07-1.09/g/cm³ Hardness: 82-85 HD Tensile Strength: 38-43 MPa Elongation at Break: 16-22% Bending Modulus: 48-60 MPa Bending Strength: 2300-3000 MPa Young’s Modulus: 1100-1300 MPa Izod Impact Strength: 133 J/m Volume Shrinkage Rate: 2.2-5.5% Cleaning: 95% IPA Washing duration: ≥3 mins UV Wavelength: 405 nm Curing Temperature: 18-30 ℃ UV Intensity: 25000-30000 uW/cm² Curing time: 3 mins Disposal: Post-UV-curing resin is treated as plastic waste Cleaning: Water Washing duration: Medium ≥5 min UV Wavelength: 405 nm Curing Temperature: 18-30 ℃ UV Intensity: 25000-30000 uW/cm² Curing time: 3 mins Disposal: 1. Do not drain wastewater into sewers to avoid contaminating groundwater. 2. After cleaning, let the wastewater sit in the tank for a period of time. 3. Place it under sunlight to allow the resin in the tank to fully cure. 4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution. What’s in the Box Anycubic Water Wash Resin 2.0 – Translucent Red x1

• Brand: Anycubic
• Category: 3D Printing > 3D Printer Materials