The Xiaomi Mi Vacuum Mini HEPA Filter is made from highly densified materials, designed to filter out any dirt in the air during usage. The HEPA filter can securely keep the air clean during vacuuming. Easy to install and clean, these HEPA filters are also washable. This affordable filter comes in a family pack of 2, which should be changed every 2-3 months for better suction performance. The HEPA filter can be re-installed before or when it's completely dry.

FEATURES:

• 2 x HEPA Filter Pack
• Better Filtering Performance
• Highly Densified Material
• Washable
• Designed for Xiaomi Mi Vacuum Mini

SPECIFICATIONS:

• Colour: Grey
• Material: Highly Densified Material

WHAT’S IN THE BOX:

• Xiaomi Mi Vacuum Mini HEPA Filter x2
• User Manual x1

Get things fixed quickly and easily around the house with the Xiaomi Cordless Screwdriver. With 5N.m of torque and 200 RPM, there's no need to break a sweat when trying to take things apart or do maintenance on equipment. This portable screwdriver comes with 12 high-quality S2 steel bits for various situations. Its rechargeable 2000mAh battery means you can use it on the go and not have to worry about plugging it in unless its charging time which just takes about 3 hours to fully charge. It also comes with an extension rod for those harder-to-reach areas, as well as a storage case to keep everything safe. Whether you work in a technical workshop or are just an at-home handyman, the Xiaomi Cordless Screwdriver is the perfect companion for DIY.

FEATURES:

• 5N.m of Torque
• 12 S2 Steel Bits
• 3.6V Power
• 2000mAh Battery
• 200 RPM
• Storage Case and Extension Rod Included

SPECIFICATIONS:

• Type: Screwdriver
• Max Torque: 5N.m
• Rated Power: 3.6V
• Non-load Speed: 200r/min
• Battery Capacity: 2000mAh
• Charging Time: 120-180min
• Extension Rod: 6 cm
• Screw Bits Material: S2 Steel
• Screw Bits: PH1 / PH2 / PH3 / H3 / H4 / H5 / SL4 / SL6 / T15 / T20 / T25 / PZ2
• Screwdriver Size: 12.4 x 13 x 4.2 cm
• Weight: 350g

WHAT'S IN THE BOX:

• Xiaomi Cordless Screwdriver x1
• Screwdriver Bits x12
• 60mm Extension Rod x1
• Charging Cable x1
• Storage Bag x1
• Screwdriver Bits Box x1
• User Manual x1

The Xiaomi Vacuum Cleaner G10 Mop Kit allows you to easily keep your hardwood floors clean and safe. It comes in a pack of two washable mop pads and four water dispensers. The microfibre mop pads keep your floors clean and safe from germs. It attaches easily to your Xiaomi Mi Vacuum Mop G10 and can just as easily be replaced. The water dispenser comes with a leak-proof seal for additional safety.

FEATURES:

• Mop Pads and Water Dispenser Kit
• Microfibre Pads
• Leak-proof Seal on Water Dispenser
• Keep Floors Clean and Safe
• Compatible with the Xiaomi G10 Vacuum

SPECIFICATIONS:

• Colour: Grey
• Cloth Material: Microfibre
• Compatibility: Xiaomi G10 Vacuum

WHAT’S IN THE BOX:

• Xiaomi Mi Vacuum Cleaner G10 Mop Pad x2
• Xiaomi Mi Vacuum Cleaner G10 Water Dispenser x4

Enjoy enhanced ergonomics with the WINX DO Ergo Adjustable Laptop Stand. With six adjustable angles, this stand allows you to customize your workspace and get the perfect angle for your needs. By elevating your laptop to eye level, you can reduce neck and back strain while working. It features sturdy aluminium construction with a hollow design for passive heat dissipation as well as cable management. Anti-slip pads ensure your device is secure when in use while anti-skid silicone feet offer additional stability. The WINX DO Ergo Adjustable Laptop Stand is compatible with laptops up to 15.6" screens.

FEATURES:

• Sleek modern aluminium design
• Six adjustable angles for customized ergonomics
• Foldable & portable
• Passive heat dissipating design for cooling
• Anti-slip pads for stability
• Perfect for use at the office, working from home or school desk setups

SPECIFICATIONS:

• Compatibility: Laptops up to 15.6" screens
• Material: Aluminium Alloy
• Product Dimensions: 21.3 x 21.5 x 1.5 cm
• Product Weight: 450g

WHAT'S IN THE BOX:

• WINX DO Ergo Adjustable Laptop Stand x1

The Port Desk Mount Dual Monitor Display Arm is a display arm for one monitor, with widescreen compatibility up to 32”. The arm is fully articulated for optimal positioning. It supports heavy screens up to 8kg. Its ergonomic design helps reduce musculoskeletal disorders. The passage of the cables inside the arm frees up space on the workstation. You have the possibility to orient your screen as you see fit (portrait or landscape). Installation is quick thanks to its removable VESA mount (100x100mm and 75x75mm). There are two methods to attach the arm to your desktop, you can either clamp it on or use a grommet base.

FEATURES:

• Display Arm for Dual Monitors
• Ergonomic Design
• Aluminium Body
• Adjustable Articulated Arms
• Tilt, Swivel and Rotate
• Universal VESA Mounts
• Up to 32″ Support

SPECIFICATIONS:

• Material: Aluminium + Plastic + Steel
• Mount Connection: VESA Screen Fixation (75 x 75/100 x 100)
• Maximum Screen Support: Up to 32″ Dual Monitors
• Maximum Weight Support: Up to 8kgs
• Dimensions: 13.5 x 41 x 10.5 cm
• Weight: 3800g

WHAT’S IN THE BOX:

• Port Desk Mount Dual Monitor Display Arm – Black x1
• User Manual x1

Enjoy enhanced ergonomics with the WINX DO Ergo Multi-Adjustable Laptop Stand. With a dual-axis design, this stand allows you to customize your workspace and get the perfect angle for your needs. By elevating your laptop to eye level, you can reduce neck and back strain while working. It features sturdy aluminium construction with a hollow design for passive heat dissipation as well as cable management. Anti-slip pads ensure your device is secure when in use while anti-skid silicone feet offer additional stability. The WINX DO Ergo Multi-Adjustable Laptop Stand is compatible with laptops up to 15.6" screens.

FEATURES:

• Sleek modern aluminium design
• Dual-axis with adjustable angles for customized ergonomics
• Foldable & portable
• Passive heat dissipating design for cooling
• Anti-slip pads for stability
• Perfect for use at the office, working from home or school desk setups

SPECIFICATIONS:

• Compatibility: Laptops up to 15.6" screens
• Material: Aluminium Alloy
• Product Dimensions: 26.4 x 22.5 x 5.5 cm
• Product Weight: 900g

WHAT’S IN THE BOX:

• WINX DO Ergo Multi-Adjustable Laptop Stand x1

The WINX CALL Clear USB Headset is ideal for hands-free communication thanks to its omnidirectional microphone. Talk for hours thanks to the ergonomic foam ear cups and lightweight adjustable headband which ensure the best fit. This plug-and-play WINX DO Clear USB Headset is widely compatible with applications like Skype, Zoom, Google Hangouts, and Teams. It features a USB connection as well as in-line audio controls so you can adjust the volume or mute quickly and easily.

FEATURES:

• Full stereo sound for a crisp and clear audio experience
• Clear and sensitive microphone designed for voice calls
• In-line audio controls for volume adjustment and mic muting
• Ergonomic ear pads and adjustable headband for all-day comfort
• Rotatable gooseneck microphone for added convenience
• Broad device compatibility with its USB connector
• Suited to popular calling applications such as Skype, Zoom, Google Hangouts, and more

SPECIFICATIONS:

• Speaker size: 40mm
• Speaker frequency: 20Hz-20Khz
• Microphone direction: Omnidirectional
• Microphone frequency: 100Hz-10KHz
• Connector: USB
• Cable length: 180cm
• Compatibility: Devices with a USB port

WHAT'S IN THE BOX:

• WINX CALL Clear USB Headset x1
• User Manual x1

The Port Desk Mount Monitor Display Arm is a display arm for one monitor, with widescreen compatibility up to 32''. The arm is fully articulated for optimal positioning. It supports heavy screens up to 8kg. Its ergonomic design helps reduce musculoskeletal disorders. The passage of the cables inside the arm frees up space on the workstation. You have the possibility to orient your screen as you see fit (portrait or landscape). Installation is quick thanks to its removable VESA mount (100x100mm and 75x75mm). There are two methods to attach the arm to your desktop, you can either clamp it on or use a grommet base.

FEATURES:

• Display Arm for Single Monitor
• Ergonomic Design
• Aluminium Body
• Adjustable Articulated Arm
• Universal VESA Mounts
• Up to 32" Support

SPECIFICATIONS:

• Material: Aluminium + Plastic + Steel
• Mount Connection: VESA Screen Fixation (75 x 75/100 x 100)
• Maximum Screen Support: Up to 32"
• Maximum Weight Support: Up to 8kgs
• Dimensions: 10 x 41 x 9 cm
• Weight: 2200g

WHAT'S IN THE BOX:

• Port Desk Mount Monitor Display Arm - Black x1
• User Manual x1

The OEM Power to Clover/Kettle Plug Cable allows you to save some additional space while conveniently powering multiple devices from one plug. It features a 3 prong plug that connects to your power outlet and splits to a conventional kettle plug as well as a clover plug. This is ideal for powering your desktop PC and any compatible clover prong devices such as a notebook charger at the same time. This cable is also perfect for when space is limited in the workplace or home. This cable is compatible with many devices such as power transformers, computers, monitors, scanners or printers.

FEATURES:

• Kettle and Clover Plug Support
• Splits Both Power Outputs
• Great for Saving Space
• Widely Compatible
• 2.8 Meters

SPECIFICATIONS:

• Interface: 3 Prong Plug(SA), Kettle Plug, Clover Plug
• Length: 2.8m
• Colour: Black

WHAT'S IN THE BOX:

• OEM Power to Clover/Kettle Plug Cable - Black x1

Antec’s new generation of Atom power supplies is crafted for quality, efficiency, and performance. Featuring an output of 550W, and a quiet 120 mm silent fan. The 120mm silent fan is ideal for quiet computing and is designed for longer life, guaranteeing hours of reliable operation. For safety, the CircuitShield™ suite of industrial-grade protections ensures that the power delivered to your system is safe and reliable in any environment. It also features a thermal manager which gives you advanced fan control for optimal heat and noise management and will allow your PSU to stay at an optimal temperature. The Antec Atom V550 ATX Power Supply is the power supply you won’t want to miss out on.

FEATURES:

• 550W Output
• CircuitShield™ – Industrial grade protections: OPP/OVP/UVP/SCP
• 120mm Silent Fan
• Thermal Manager – advanced fan control for optimal heat and noise management.
• Non-modular Design

SPECIFICATIONS:

• Input: 230Vac, 5A, 47-63Hz
• Output: +3.3V/18A, +5V/16A, +12V/42A, -12V/0.3A, +5Vsb/2.5A
• Total Output: 550W
• Connectors:
  • 24-Pin Main Connector x1
  • 8(4+4) Pin EPS12V x1
  • 8(6+2) Pin PCI-E x2
  • SATA x5
  • Molex x2
  • FDD x1
• Cooling: 120mm Silent Fan

WHAT’S IN THE BOX:

• Antec Atom V550 ATX Power Supply – Black x1
• User Guide x1

The Xiaomi Mi Air Purifier HEPA Filter is designed to eliminate 99.97% of particles as small as 0.3 microns from the air. It works in conjunction with the Xiaomi Air Purifier to get rid of harmful bacteria. This true HEPA filter is designed for air-born dust, cigarette smoke, pet dander, mold spores, pollen, germs, virus, and odors. When combined in a 3 stage filtration system, the pre-filter, HEPA filter, and activated carbon work well together to capture particles and odors in the air. Its tower-shaped cylinder design helps circulate the air more effectively. The Air Purifier HEPA filter helps to purify the air while having a 3 to 6 months life span.

FEATURES:

• Eliminate 99.97% of particles
• 3 Stage filtration system
• RFID equipped.
• 3~6 month lifetime, which can be checked from the Mi Home app.
• Applicable for Mi air purifier 2, 2H, 2S, Pro, 3.

SPECIFICATIONS:

• Colour: Grey
• Anti-Formaldehyde: Yes
• Particles Filter Efficiency: 99.97%
• Product Dimensions: φ20 x 29.3 cm
• Product Weight: 1160g

WHAT'S IN THE BOX:

• Xiaomi Mi Air Purifier HEPA Filter - Grey x1

Equip yourself with the latest Redragon gaming combo. The Redragon RD-S129W 3in1 RGB Gaming Combo is a gaming essentials pack set with a gaming keyboard, gaming mouse, and a gaming headset all in a unique white colour.  The Redragon K630 Dragonborn 60% RGB Mechanical Gaming Keyboard features a compact design with 61 keys and RGB colour backlighting. The Redragon M607 Griffin Gaming Mouse has 7 programmable buttons and up to 7200DPI with 10G acceleration. The Redragon H350 Pandora 2 USB+3.5mm Aux RGB Gaming Headset features 7.1 Channel Surround Sound, as well as 50mm audio drivers for good bass clear sound clarity. This Redragon gaming combo features a unique white colour with RGB lighting and is a great way to keep ahead of the competition.

FEATURES:

• Unique White Colour 3in1 Combo
• RGB Colour Backlighting
• 61 Keys
• Mechanical BROWN Switches
• 7 Programmable Buttons
• Up to 7200DPI
• 7.1 Surround Sound Audio
• Custom-tuned 50 mm Drivers

SPECIFICATIONS:

Redragon K630 Dragonborn 60% RGB Mechanical Gaming Keyboard

• Colour: White
• Number of keys: 61
• Switches: Removeable mechanical BROWN switches
• Key type: Double-shot injection keycaps
• LED: RGB LED-backlit
• Connection: Type-C

Redragon M607 Griffin Gaming Mouse

• Colour: White
• Buttons: 7 Programmable
• DPI: Up to 7200 DPI (800/1200/1600/2400/7200 DPI)
• Acceleration: 10G
• Lighting: 7 x RGB Colour Modes

Redragon H350 Pandora 2 USB+3.5mm Aux RGB Gaming Headset

• Interface: USB + 3.5mm Aux
• Integrated Volume Controls: Yes
• Colour: White
• RGB Backlighting: Yes
• Dimensions: 16 x 21 x 9.2 cm
• Weight: 367g

WHAT’S IN THE BOX:

• Redragon K630 Dragonborn 60% RGB Mechanical Gaming Keyboard – White x1
• Redragon M607 Griffin Gaming Mouse – White x1
• Redragon H350 Pandora 2 USB+3.5mm Aux RGB Gaming Headset – White x1

[embed]https://www.youtube.com/watch?v=d5jrSO5CfwQ[/embed]

The Mi Motion-Activated Night Light 2 is a 3-in-1 smart light for lighting, motion detection and light detection. Device upgrades have been made with you in mind, allowing it to detect human movement even in the dark. Once it detects any human movement, the light turns on. The Night Light 2 allows you to find the perfect lighting for your environment. It features 2800K warm, gentle yellow light with no visible flicker or harmful blue light, so you can get up at night without disturbing anyone.

Convenient and fun, the Mi Motion-Activated Night Light 2 can be used as a motion sensor and light sensor. The Mi Motion-Activated Night Light 2 features a customised Fresnel lens able to detect the most sensitive of human movements. The device features an extra-wide horizontal sensor range of 120° able to detect movement at a 6m distance in front of the light and a 2.5m distance to the sides.

The night light can stand freely on flat surfaces such as bedside tables or desks. The adhesive sticker on the base can be used for mounting onto a flat vertical surface. Turn the brightness high in wardrobes and porches for clear lighting without having to turn on a mains light. Turn the brightness low in staircases and bedrooms for soft, non-disruptive lighting. The Mi Night Light 2 can also be removed from the base to use separately if needed.

Thanks to the long battery life you can get many more hours of usage, it can last for up to 180 days of battery life at the highest brightness setting. You can also turn off the night light function via the Mi Home/Xiaomi Home app. The brightness and lighting up time can both be adjusted in the Mi Home/Xiaomi Home app. Using the Bluetooth gateway, the device can be set to connect with different devices at different times.

FEATURES:

• Motion-Activated
• 360° Rotation
• Low Energy Consumption
• Motion Detection
• Light Detection
• Bluetooth 4.2 Connection
• Smart Link

SPECIFICATIONS:

• Luminous Flux: 2.5 - 25 lm
• Wireless Connectivity: Bluetooth 4.2 BLE
• Rated Voltage: 4.5V
• Rated Power: 0.35W
• Operating Frequency: 2402 - 2480MHz
• Maximum Output Power: ≤8 dBm
• Compatible Software: Android 4.4 and iOS 9.0 or above
• Product Dimensions: Φ8 x 6.2 cm
• Product Weight: 121 g

WHAT'S IN THE BOX:

• Xiaomi Mi Motion-activated Night Light 2 - White x1
• User Manual x1

Crucial DDR5 Desktop Memory has the high speed needed for the next generation of multi-core CPUs, but it’s not just faster than DDR4, it’s better. This innovative technology empowers your system to multitask seamlessly, load, analyze, edit, and render faster. All of this is done with higher frame rates, significantly less lag, and optimized power efficiency over the previous generation. Available in blazing speeds of 4800MT/s and a density of 8GB, the Crucial DDR5 Desktop Memory can enable your computer to harness the blazing speeds that were once only possible with extreme performance memory.

FEATURES:

• Power through heavy workloads with a density of 8GB
• Harness blazing speeds at 4800MT/s - 1.5x faster than DDR4
• Game at higher frame rates
• Run demanding software with nearly 2x the bandwidth of DDR4
• Optimize efficiency with DDR5’s innovative improvements and on-module power management
• Empower your system with the performance needed for next-generation multi-core CPUs

SPECIFICATIONS:

• Density: 8GB
• Speed: DDR5-4800
• CAS Latency: 40
• Extended Timings: 40-39-39
• Colour: Black
• Form Factor: UDIMM
• Voltage: 1.1V
• ECC: Non-ECC
• Product Dimensions: 13.3 x 3.1 x 0.4 cm
• Product Weight: 16.2g

WHAT'S IN THE BOX:

• Crucial 8GB DDR5 4800MHz UDIMM Memory Module - Black x1

The Port Designs Portland 15.6" Laptop Sleeve is an ultra-soft, padded cover for your MacBook, notebook or laptop. Its fully padded structure with 7mm foam panels offers optimal protection when on the go. Made from a durable 900D polyester outer material, this notebook sleeve will ensure your devices stay protected for longer. Its trendy and elegant design, with an ultra-soft anti-scratch velvet interior, has been developed by Port Designs in their creative studio in Paris. The durable zipper features a rubber finished puller with a colourful logo and is designed for up to 15.6" laptops.

FEATURES:

• Full padded structure with 7mm foam panels for optimal protection
• Durable outer material: 900D polyester
• Royal blue anti-scratch lining
• Rubber finish with colourful puller and logo
• Designed for 15.6" Laptops

SPECIFICATIONS:

• Material:
  • Inner: Velvet
  • Outer: 900D Polyester
• Laptop Max Compartment size: 37 x 26 x 3 cm (Up to 15.6")
• Product Dimensions: 41 x 29 x 3 cm
• Product Weight: 180g

WHAT'S IN THE BOX:

• Port Designs Portland 15.6" Laptop Sleeve - Black x1

Easily monitor and get alerts to any openings around your home with the Xiaomi Mi Door and Window Sensor 2. The Sensor 2 can connect to even more scenes with the 2-in-1 light and opening/closing sensor. Its magnetic induction sensor determines open or closed statuses. After connecting to a Bluetooth Gateway, you can easily view the device status from your smartphone anytime, anywhere.

A new light sensor detects lighting and connects to more scenes. When the light sensor detects that ambient lighting is dim, the sensor connects with a smart light and initiates the night-time entry light scene.

Instant alerts are sent whenever a door/window opens or closes unexpectedly, for greater peace of mind when a baby is on the move. The sensor attaches to anything that opens or closes, making it very versatile. You can also set alerts for unexpected openings, or doors that have been left open for a certain time.

Easily use the Mi Home/Xiaomi Home app to access automated event history. It can also connect to other smart devices in your home via the Mi Home/Xiaomi Home app. For example, whenever your pet gate is opened, a smart camera can automatically record the event, upload it to the cloud and send an alert to your smartphone.

The Mi Door and Window Sensor 2 connects to your smartphone via Bluetooth so you can view its status. It also connects to products with built-in Bluetooth gateway functionality so you can remotely view status, receive opening and closing alerts and link to other smart products.

The Xiaomi Mi Door and Window Sensor 2 features a compact and lightweight body, which can strongly adhere to anything that opens or closes in the home. This allows you to turn traditional installations into smart home devices with ease.

FEATURES:

• Event History
• Synchronised Smartphone Notifications
• Left Open Alert
• Now with a Light Sensor
• Best used in conjunction with the Xiaomi Smart Home hub 2

SPECIFICATIONS:

• Wireless connection: Bluetooth 5.1 BLE
• Battery type: CR2032 (installed)
• Colour: White
• Product Dimensions: 3.4 x 3.3 x 1.5 cm

WHAT'S IN THE BOX:

• Xiaomi Mi Door and Window Sensor 2 - White x1
• Adhesive Sticker x2
• User Manual x1

The Port Connect Travel and Foldable Notebook Stand is a great addition to your portable workspace. Ideal for notebooks and tablets alike, its sturdy design can support notebooks ranging from 10" up to 15.6". It is lightweight and can easily be folded and inserted into the included carrying pouch for easy storage or business trips. Its ergonomic design ensures the optimal viewing angle for productivity and comfort.

The stand can also be adjusted to six levels, from 15 to 45°, for the perfect angle. This helps prevent musculoskeletal disorders, which can often happen due to poor posture for long periods. To help secure your notebook, it features safety hooks and non-slip pads to prevent your devices from falling off the stand while you work. The ultra-thin, lightweight structure is made from aluminium for durability and maximum portability.

FEATURES:

• Compatible with notebooks from 10’’ to 15.6’’ and most tablets
• Ergonomic design with six adjustable angles to prevent neck and back pain
• Ultra-thin, the lightweight folding structure ensures maximum portability
• Optimal heat dissipation thanks to its fully open notebook platform and aluminium construction
• Safety hooks and anti-slip pads to prevent the device from falling
• Heavy-duty aluminium body
• Carrying pouch included

SPECIFICATIONS:

• Adjustable: from 15 to 45°
• Foldable: Yes
• Compatibility: Notebook from 10" to 15.6", Most tablets
• Colour: Black
• Materials: Aluminium and Silicon
• Product Dimensions: 4.5 ~ 17.5 x 1.4 ~ 15 x  x 25.5 cm
• Product Weight: 260g

WHAT’S IN THE BOX:

• Port Connect Travel and Foldable Notebook Stand – Black x1
• Carrying Pouch x1
• User Manual x1

The ASRock DeskMini X300 Series supports the latest AMD Ryzen™ 5000 G-Series desktop processors. With up to 8 cores and 16 threads, these processors deliver the ultimate performance for multitasking computing compared to mobile processors. In addition, with AMD Ryzen™ 5000 G-Series desktop processors, you get the world's fastest integrated graphics.

The ASRock DeskMini X300 supports many overclocking options, so you can improve system performance by tuning the core clock and releasing the potential of the AM4 APU. The DeskMini supports Dual Channel DDR4-4000+MHz (OC) memory, up to 64GB. Thanks to its high-speed memory and Radeon™ Graphics, the DeskMini provides amazing 3D performance.

The DeskMini  X300 features an Aluminum MOSFET Heatsink which provides great heat dissipation to ensure excellent performance for overclocking and system stability in daily computing. It supports up to 4 Storage devices, including an M2_1 M.2 (2280)-PCIe Gen3 x4, M2_2 M.2 (2280) –PCIe Gen3 x2/x4 and 2x 2.5” SATA 6Gb SSD/HDD Trays. In addition to this, it also supports RAID 0/1. Build a mini data centre at home thanks to the DeskMini's supported RAID 0/1 function. RAID 0 – offers superior I/O performance, and RAID 1 – protects critical data in a mirrored data mode.

For versatility, the DeskMini supports 3 display outputs simultaneously, allowing you to expand your desktop by multiplying your screen area. With multiple monitors, games become more immersive, workstations become more useful and you become more productive.

Please note that the CPU, memory, and HDD/SSD are not included.

FEATURES:

• Mini Desktop Barbone PC
• AMD X300 Chipset
• Supports AMD AM4 Socket CPUs
• AM4 Cooler Max Height ≤46mm
• Supports 2 x SO-Dimm DDR4 Memory up to 64GB
• HDMI, DisplayPort, and D-Sub Video Outputs
• Type-C and USB 3.2 ports
• Ultra M.2(2280) Support
• Gigabit LAN, Wi-Fi, and Bluetooth Support

SPECIFICATIONS:

• CPU: Supports AMD AM4 Socket CPUs (Cezanne, Renoir, Picasso, Raven Ridge, up to 65W)
• Cooler: Supports AMD AM4 CPU Cooler (Max. Height ≦ 46mm)
• Memory:
  • Supports 2 x SO-DIMM DDR4 Memory, Max. 64GB
  • AMD Ryzen 5000/4000 series – 3200MHz
  • AMD Ryzen 3000/2000 series – 2933MHz
• Chipset: - AMD X300
• Graphics Output:
  • HDMI(4K @60Hz)
  • DisplayPort, D-Sub
• Audio
  • 1 x Head Phone with MIC Jack, 1 x MIC-In (RealtekALC233)
• Front USB
  • 1 x USB 3.2 Gen1 Type-C, 1 x USB 3.2 Gen1 Type-A
• Rear USB
  • 1 x USB 3.2 Gen1 Type-A, 1 x USB 2.0 Type-A
• Storage
  • 2 x SATA 6Gb 2.5-inch 7mm/9.5mm Hard Drive (RAID 0/1)
  • 1 x Ultra M.2 (2280) PCIe Gen3 x4 SSD Slot
  • 1 x Ultra M.2 (2280) Slot
    • PCIe Gen3 x4 (Renoir, Picasso and Raven Ridge APU)
    • PCIe Gen3 x2 (Athlon 2xxGE series APU)
• LAN: Gigabit LAN (RealtekRTL8111H)
• WLAN: 1 x M.2 (key E 2230) Slot for Wi-Fi + BT Module
• Connectors:
  • 1 x USB 2.0 Header
  • 1 x Front Panel Header
  • 2 x 4-Pin fan connectors (CPU, SYS)
  • 1 x DC-In Jack (Supports 19V Power Adapters)
  • 1 x Internal Speaker Header (4-Pin)
  • 1 x Chassis Intrusion Header (2-Pin)
  • 1 x Audio Header (4-Pin)
• Dimensions: 15.5 x 15.5 x 8 cm

WHAT'S IN THE BOX:

• ASRock DeskMini X300W Barbone Mini-ITX Mini PC x1
• SATA Data with Power Cable x2
• 120W/19V adapter x1
• Screws Pack x1
• Intel® AC-3168 Wi-Fi Kit x1

The HDCVT HDMI Extender with IR Control can extend your high definition video/audio signal and IR control signal up to 70m for 1080p resolution, and up to 40m for 4K30 resolution via a single CAT6 cable. The high-quality construction allows you to achieve zero delays, as well as uncompressed long-distance transmission between the transmitter and receiver. This extender with HDMI loop output can also be cascaded to the next extender, supporting resolutions of up to 4K @ 30Hz. For additional versatility, it supports the EDID copy function as well (you can choose local or remote EDID). To top it all off it also supports high-quality audio formats like PCM7.1, Dolby True HD, DTS HD. This product can be widely used in multimedia conference halls, TV teaching or with large-screen displays.

FEATURES:

• HDMI 1.4, HDCP 1.4 and DVI 1.0 Compliant
• Support Video Resolution up to 4K2K@30Hz YUV 4:4:4
• CAT6: 230ft/70m for 1080p, 131ft/40m for 4K30
• CAT5E: 197ft/60m for 1080p, 115ft/35m for 4K30
• Support Copying EDID from Receiver Display or Loop Out Display
• Allow for Cascading via additional HDMI loop out port
• Support one-way POC functionality (from transmitter to receiver)
• One-way IR signal transmission

SPECIFICATIONS:

• HDMI Compliance: HDMI 1.4
• HDCP Compliance: HDCP 1.4
• Video Bandwidth: 10.2Gbps
• Video Resolution: Up to 4K@30Hz
• Audio Support Up to 7.1CH HD audio
• Input TMDS Signal: 3.3 volts
• Input DDC Signal: 5.0 volts/P-P
• ESD Protection
  • Human Body model:
    • +/- 8 kV (air-gap discharge)
    • +/- 4 kV (contact discharge)
• Transmitter:
  • Input:
    • 1 x HDMI Type A [19-pin female]
  • Output:
    • 1 x HDMI Type A [19-pin female]
    • 1 x IR OUT [3.5mm Stereo Mini-jack]
    • 1 x CAT OUT [RJ45, 8-pin female]
• Receiver:
  • Inputs:
    • 1x IR IN [3.5mm Stereo Mini-jack]
    • 1x CAT IN [RJ45, 8-pin female]
  • Output:
    • 1x HDMI Type A [19-pin female]
• Housing: Metal Enclosure
• Colour: Black
• Power Supply 12V/1A DC
• Power Consumption
  • Transmitter: 1.86W
  • Receiver: 0.87W
• Product Dimensions: 7.9 x 6.9 x 1.7 cm
• Weight:
  • Transmitter: 132g
  • Receiver: 130g

WHAT'S IN THE BOX:

• HDCVT HDMI 70M Extender Receiver x1
• HDCVT HDMI 70M Extender Transmitter x1
• IR Blaster Cable x1
• IR Receiver Cable x1
• 12V/1A DC Power Adapter x1
• User Manual x1

The WINX LINK Simple Type-C & USB Adapter Combo offers the ultimate solution to connect USB peripherals to devices with Type-C ports, and Type-C peripherals to devices with USB ports. These sleek zinc alloy adapters are compatible with MacBooks, ultrabooks, laptops, and other Type-C devices and offer 5Gbps data transmission speeds with up to 3 Amps of power.
Note:
• Do not use this adapter with Qc3.0, FCP, SCP, VOOC fast chargers or wireless chargers.
• This adapter can charge mobile phones and tablets, but not laptops.

https://www.youtube.com/watch?v=gGtzv9pCDJs

FEATURES:

• Connect USB peripherals to your OTG compatible devices via Type-C
• Connect Type-C peripherals to devices via Type-C
• Built-in surge protection for safe charging & data transmission
• Up to 5Gbps data transmission speeds
• Supports output power up to 3 Amps
• Slim and compact for those always on-the-go

SPECIFICATIONS:

• LINK Simple Type-C to USB OTG Adapter: Female: USB 3.0 | Male: Type-C
• LINK Simple USB to Type-C Adapter: Female: Type-C | Male: USB 3.0
• Material: Zinc alloy
• Compatibility: Windows / MacOS / Android
• Supported voltage: 5V, 9V, 12V, 20V
• Dimensions: 3.3 x 1.7 x 0.8 cm
• Product weight: 7.6g

WHAT'S IN THE BOX:

• WINX LINK Simple USB to Type-C Adapter x1
• WINX LINK Simple Type-C to USB Adapter x1

The WINX LINK Simple USB to Type-C Adapter is ideal for those who need to connect Type-C peripherals to a device with a USB port. Connect your Type-C compatible device, enjoy up to 5Gbps data transmission speeds with up to 3 Amps of power. The LINK Simple USB to Type-C Adapter Dual Pack features two sleek zinc alloy adapters compatible with MacBooks, ultrabooks, laptops, and other Type-C devices.

Note:
• Do not use this adapter with Qc3.0, FCP, SCP, VOOC fast chargers or wireless chargers.
• This adapter can charge mobile phones and tablets, but not laptops.

FEATURES:

• Convert your USB port into a Type-C port
• Built-in surge protection for safe charging & data transmission
• Up to 5Gbps data transmission speeds
• Supports output power up to 3 Amps
• Slim and compact for those always on-the-go

SPECIFICATIONS:

• Female Connector: Type-C
• Male Connector: USB 3.0
• Material: Zinc alloy
• Compatibility: Windows / MacOS
• Supported voltage: 5V, 9V, 12V, 20V
• Product Dimensions: 3.3 x 1.7 x 0.8 cm
• Product Weight: 7.6g

WHAT'S IN THE BOX:

• WINX LINK Simple USB to Type-C Adapter x2

The Cudy FS1018PS1 18-Port 10/100M PoE+ Switch is a security surveillance Ethernet switch aimed at high-definition surveillance and security. It supports bandwidth speeds of up to 7.2Gbps and features 16 PoE ports and 2 uplink ports. It also complies with IEEE802.3af/at Standard speeds for great performance.

The 18 port switch supports 120W total PoE power and up to 30W for one PoE port. It uses Auto-sensing technology to automatically detect how much power is needed depending on the cable used. For additional protection, it features Port-Power-Prioritization technology which ensures continuous power supply of key nodes. In addition to this, it also offers lightning protection with an electrostatic standard of 6KV for contact and 8KV for air.

Used for many applications the Cudy FS1018PS1 works with IP Cameras for home, office or small businesses. Its simple plug-and-play interface makes it incredibly easy to use. Its sturdy design is made from high-quality metal. This gives you a longer service life and provides better heat dissipation, making it suitable for most environments. It also features a built-in fan and venting holes to ensure stable product operation.

FEATURES:

• 200 watts PoE power supply, up to 30 watts per port
• 2 10/100/1000M uplink ports +1 SFP Port
• 16 10/100M PoE+ ports
• CCTV mode supports remote PoE feeding up to 250m
• VLAN mode isolates each PoE Ports for security
• IEEE 802.3at / IEEE 802.3af standard compliant
• Plug&play, simple setup with no configuration needed
• Watchdog reactivates the abnormalPD by resuming POE power

SPECIFICATIONS:

• Power
  • Power Supply: Built-in power supply
  • Voltage Range: AC100~240V
  • Consumption: 190W for 16 PoE
• Ethernet
  • Speed
    • 1~16 Port: 10/100/Mbps
    • G17~G18 Port:10/100/1000Mbps
    • G19 Port: SFP 1.25bps
  • Transmission Distance
    • 100Meter(328ft)for RJ-45
    • The distance is determined by the optical module
    • The optical module is optional
• Network Switch:
• Ethernet Standard: IEEE 802.3 802.3u 802.3ab 802.3af/at
• Switching Capacity: 7.2G
• Transfer Rate:
  • 14880 pps for 10Mbps
  • 148800 pps for 100Mbps
  • 1488000 pps for 1000Mbps
• MAC Adsress: 4K MAC sddress table
• Link/ACT:
  • On(Green): The port is connecting
  • Blinks: The port is receiving or transmitting data.
  • Off: The port is not linked successfully with the device
• POE
  • On(Orange): PD is connected
  • Off: No PD is connected or power forwarding fails
  • PoE Pin Assignment: V+(RJ45 Pin 1, 2) - (RJ45 Pin 3,6)
• Colour: Grey
• Product Dimensions: 28 x 18 x 4.4 cm

WHAT'S IN THE BOX:

• Cudy FS1018PS1 18-Port 10/100M PoE+ Switch - Grey x1
• Power Adapter x1

Built-in with the latest Bluetooth 5.0 technology, the Cudy WE4000 AX5400 Wi-Fi 6/6E Bluetooth 5.2 PCIe Adapter can achieve 2 times faster speed and 4 times broader coverage than Bluetooth 4.2. Connect as many devices as you want, including game controllers, headphones, and keyboards, to enjoy a smoother experience than ever before.

Lower latency is essential to gaming success, the Cudy WE4000 AX5400 adapter gives you an incredibly smooth experience. Revolutionary OFDMA reduces lag by up to 75% so that you can enjoy ultra-responsive real-time gaming and immersive VR experiences.

Combined with the AX210 WiFi 6E card, this WiFi 6E PCIe card brings faster and clearer Wi-Fi to fully unlock the potential of your Wi-Fi 6E router. 2.4GHz provides 574Mbps maximum speed and extremely long range, 5GHz and 6GHz reaches 2402Mbps maximum speed, ideal for gaming and 4K streaming. Full compatibility for 802.11ax/ac/a/b/g/n routers.

For security, the WPA3 provides more secure and individualized encryption in personal password safety, protecting your network from wireless hacking. This allows you to always keep your network safe while gaming online.

FEATURES:

• AX5400 Dual Band WiFi 6/6E PCIe Network Adapter
• Tri-Band 2402Mbps + 2402Mbps + 574Mbps Speed
• Bluetooth 5.0/4.2/4.0
• Magnetized Antenna Base with 1.5m RF Cable
• Intel Wi-Fi 6E chipset AX210 Inside
• 802.11ax/ac/a/b/g/n

SPECIFICATIONS:

• Antenna: External 2x5dBi Antenna
• Drive Free: Not Supported
• Physical Interface: PCI-E-X1
• USB: Not Supported
• Wireless Frequency:
  • 2.412-2.472GHz:574Mbps
  • 5.180-5.825GHz:2402Mbps
  • 6GHz: 2402Mbps
• Bluetooth: Bluetooth 5.2
• Wireless Standard: IEEE802.11ax / ac/ a/ b/ g /n
• Compatible Card Slot: PCIE-16X/PCIE-4X/PCIE-8X/PCIE-1X; Graphics slot
• Transmit Power:
  • WiFi: 19.5 dBm(max)
  • BT:10 dBm
• Scope of Application: Desktop PC, Except Mac
• Web Environment: Gigabit and above networks
• Support OS: Windows10 (64bit)
• Product Dimensions: 7.2 x 4.6 cm
• Antenna Dimensions: 9.4 x 22.1cm

WHAT'S IN THE BOX:

• Cudy WE4000 AX5400 Wi-Fi 6/6E Bluetooth 5.2 PCIe Adapter - Red x1
• 5 dBi High Gain Antenna x2
• Low-Profile Bracket x1
• Magnetized Antenna Base with Cable x1
• Bluetooth Header Cable x1
• Quick Installation Guide x1
• Resource CD Drivers x1

Upgrade your network speeds with the Cudy PE25 2.5Gbps PCI Express Network Adapter, designed for seamless downloads, media editing, server hosting, and NAS access. Supporting auto-negotiation across 10/100/1000/2.5Gbps speeds, this high-performance network card ensures maximum compatibility and reliability for demanding workloads. Whether you’re gaming, running a home server, or working on data-heavy projects, the PE25 delivers stable, low-latency connectivity for a smoother online experience.

The EEE (Energy-Efficient Ethernet) feature automatically switches the adapter into a low-power idle mode when network activity is low, reducing power consumption without sacrificing performance. Built to handle 2.5Gbps transmission rates without packet loss, the PE25 ensures uninterrupted reliability, making it ideal for surveillance systems, enterprise servers, and professional workstations where consistent performance is critical.

With Wake on LAN support, you can power up your PC or server remotely over the network, enabling convenient access and management from anywhere. The Cudy PE25 is designed for versatility, with both standard and low-profile brackets included, making it compatible with tower PCs, low-profile cases, and rack-mounted servers. This flexibility ensures an easy upgrade for a wide range of setups, from home users to enterprise environments.

The Cudy PE25 works seamlessly with Windows (7 to 11), Windows Server (2012 to 2022), Linux, and DSM 7.2+, making it a perfect choice for PCs, Synology NAS devices, and more. Installation is simple with a PCIe 2.1 x1 or higher slot, and status LEDs provide instant link and activity feedback. With its robust feature set, energy efficiency, and ultra-fast 2.5G speeds, the Cudy PE25 is the ultimate choice for upgrading your network performance with ease.

FEATURES:

• 10/100/1000/2500Mbps Ethernet Port
• Wake on LAN, Flow Control
• Standard/Low-Profile Bracket
• Windows, Linux, DSM etc.
• Work on PC, Synology NAS, etc.

SPECIFICATIONS:

• Model Version: PE25 2.0
• 2.5G RJ45 Ports: 1
• LED: Speed/Link/ACT of Ethernet Port
• 802.3 Protocols:
  • 802.3x Flow Control
  • 802.3az Power Saving
  • 802.3i 10BASE-T
  • 802.3u 100BASE-T
  • 802.3ab 1000BASE-T
  • 802.3bz 2.5GBASE-T
  • Data Rate: Auto negotiation between 10Mbps, 100Mbps, 1Gbps, and 2.5Gbps
• Hardware Requirement: Requires a PCI-E 2.1 x1 or higher slot on the motherboard for powering and the Ethernet function.
• Compatible OS:
  • Windows 7/8/8.1/10/11
  • Windows Server 2012~2022
  • Linux
  • DSM 7.2+
• Environment:
  • Ambient Operating Temperature: 0 ℃ ~ 70 ℃ (32 ℉ ~158 ℉)
  • Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉)
  • Humidity: 10% ~ 90% non-condensing
  • Storage Humidity: 5% ~ 95% non-condensing
• Colour: Black
• Product Dimensions: 6.4 x 5.6 x 1.5 cm
• Product Weight: 37.2g

WHAT'S IN THE BOX:

• Cudy PE25 2.5Gbps PCI Express Network Adapter - Black x1
• Quick Install Guide x1

The Cudy LT500 4G LTE AC1200 Dual Band Wi-Fi Router uses the latest generation of 4G LTE technology to achieve speeds of up to 150 Mbps when downloading and 50 Mbps when uploading. You can also connect to games, streaming and more using Wi-Fi at a maximum speed of 867Mbps on 5GHz and 300 Mbps to 2.4 GHz.

Its high-gain antennas increase the sensitivity of the router, which allows you to establish connections over longer distances. This in turn provides stronger penetration through walls.

Its various modes also make it more versatile, if you are working in LAN mode, the LT500 is just a normal 4G LTE router. While working in WAN mode, the LT500 can maintain 4G and WAN connections at the same time and preferably provide the Internet via wired ports. Leaving the 4G network as a backup for peace of mind.

FEATURES:

• Up to 150 / 50Mbps LTE speed
• AC1200 Wi-Fi for a smoother experience
• High gain antennas expand coverage
• PPTP/L2TP/OpenVPN/WireGuard VPN client
• Flexible WAN/LAN port for dual connectivity
• Compatible with 20+ DDNS providers
• DNS over Cloudflare/NextDNS/Google

SPECIFICATIONS:

• CPU: MTK Chipset for Wi-Fi and Qualcomm Chipset for 4G
• DRAM/FLASH: 128MB DDR2 / 16M SPI Flash
• Interface:
  • 3x RJ45 10M/100M  LAN Ethernet interfaces
  • 1 x RJ45 10M/100M WAN Ethernet interfaces
  • 1 x Reset Button
  • 1 x WPS Button
  • 1 x SIM Slot (Micro)
• Antenna: 2 x WiFi Antennas and 2 x LTE Antennas
• Gain: 5dBi
• Wi-Fi Frequency: 2.4GHZ, 5GHz
• LTE Frequency Bands EU Version:
  • LTE-FDD: B1/B3/B7/B8/B20/B28A
  • LTE-TDD: B38/B40/B41
  • WCDMA: B1/B8
  • GSM/EDGE: B3/B8
• LTE Frequency Bands US Version:
  • LTE-FDD: B2/B4/B5/B12/B13/B14/B66/ B71
  • WCDMA: B2/B4/B5
• Wireless Features:
  • Wireless Standards: IEEE 802.11ac/a/n/b/g
  • Frequency: 2.4 GHz and 5GHz
  • Signal Rate:
    • 867Mbps (5GHz), 300 Mbps (2.4 GHz)
    • Compatible with 802.11ac/a/b/g/n Wi-Fi standards
  • Transmit Power:
    • CE: <20dBm
    • FCC:<30dBm
  • Wireless Modes: Enable/Disable Wireless Radio, WMM
  • Wireless Functions: WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
• System Requirements:
  • Microsoft Windows 98SE/NT/2000/XP/Vista™/7/8/8.1/10, MAC OS, NetWare, UNIX or Linux
  • Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0, or other Java-enabled browser
  • Subscription with an internet service provider (for internet access)

WHAT'S IN THE BOX:

• Cudy LT500 4G LTE AC1200 Dual Band Wi-Fi Router - Black x1
• Power Adapter x1
• RJ45 Ethernet Cable x 1
• Quick Installation Guide x1
• SIM Card Adapter x1

The Cudy POE300 60W Gigabit PoE+/PoE Injector allows you to easily supply power and data to a single PoE device. It features a Gigabit Ethernet input port and a Gigabit PoE output port. It's a great option for small surveillance systems or a VOIP phone or a WiFi AP.

The 2 port switch supports 60W total PoE power on the PoE output port. It complies with IEEE802.3af/at Standard speeds for great performance. The Injector is powered by an AC power adapter and can be easily mounted to a wall.

Used for many applications the Cudy POE300 works with IP Cameras for home, office or small businesses. It also works well with VoIP phones for business conferences and WiFi APs for the office and businesses. Its simple plug and play interface makes it incredibly easy to use.

FEATURES:

• Up to 60 watts PoE power supply
• 1 10/100/1000M Ethernet Input port
• 1 10/100/1000M PoE Output port
• IEEE 802.3at / IEEE 802.3af standard compliant
• Plug&play, simple setup with no configuration needed

SPECIFICATIONS:

• No. of channels: 1
• Pass-Through Data Rates: 10/100/1000Mbps
• Power over Ethernet Output:
  • Pin Assignment and Polarity: 1/2 (-), 3/6 (+),4/5 (+), 7/8 (-)
  • Output Power Voltage: 50Vdc
  • User Port Power: 60W
• Input Power Requirements:
  • AC Input Voltage: 100 to 240 VAC
  • AC Input Current: 0.5A 100-240 VAC
  • AC Frequency: 50 to 60 Hz
• Indicators:
  • System Indicator: AC Power
  • User Indicator: Channel Power
• Connectors: Shielded RJ-45, EIA 568A and 568B
• Regulatory Compliance:
  • IEEE 802.3af (15.4W)
  • IEEE 802.3at (30W)
  • IEEE802.3at 4Pairs(60W)
• Product Dimensions: 14.5 x 6 x 4 cm

WHAT'S IN THE BOX :

• Cudy POE300 60W Gigabit PoE+/PoE Injector - Black x1
• Power Adapter x1

The Cudy FS1026PS1 26-Port 10/100M PoE+ Switch with 1 FSP Slot allows you to manage your home or office network with ease. It features 24 Ethernet PoE ports with 2 uplink ports and 1 SFP slot. It's PoE RJ-45 connectors support any 10/100Mbps Ethernet devices, while the 2 non-PoE uplink ports support 10/100/1000Mbps Ethernet devices and it's compliant with IEEE 802.3af/802.3at network standards.

Used for many applications the Cudy FS1026PS1 works with IP Cameras for home, office or small businesses. It also works well with PCs, printers and access points in your home or office, making it ideal for small businesses. It even features a VLAN mode for additional security, this allows the ports to be isolated from one another.

Its simple plug and play interface makes it incredibly easy to use. Its sturdy design is made from high-quality metal. This gives you a longer service life and provides better heat dissipation, making it suitable for most environments. It also features a fanless design with venting holes to help dissipate heat with silent operation.

Watchdog guarantees the uninterrupted operation of your PoE devices. The PoE watchdog continuously monitors the connection status of remote hosts. If an error is detected on the remote PoE device, the PoE switch immediately restarts the device to bring it back to normal operation.

FEATURES:

• 24 x 10/100M PoE+ ports
• 2 x Gigabit Uplink port
• 1 x 1.25Gbps SFP slot
• 300 Watts PoE power budget
• IEEE 802.3at / IEEE 802.3af standard compliant
• Plug&play, simple setup with no configuration needed

SPECIFICATIONS:

• Connector Type: 24-Port 10/100M PoE+ Switch with 2 Gigabit Uplink Ports and 1 SFP Slot
• Network Protocols:
  • IEEE802.3
  • IEEE802.3u
  • IEEE802.3ab
  • IEEE802.3x
  • IEEE802.3z
• PoE Parameters:
  • PoE Standard: IEEE802.3af /IEEE802.3at
  • Max each port: 15.4W ( IEEE 802.3af )
  • Max each port：30W ( IEEE 802.3at )
  • PoE compatibility: IEEE 802.3af/at adaptive
  • PoE port output: DC48-55V
  • Power Pin : Power over spare pairs 1/2(+) , 3/6 (-)
• Network Media:
  • 10BASE-T: Cat 6 UTP(≤250 meters)
  • 100BASE-TX: Cat5 or more UTP (≤100 meters)
  • 1000BASE-TX: Cat5 or more UTP (≤100 meters)
• Optical:
  • Multi-Mode Fiber: 850nm, 1310nm
  • Transmission Distance: 550m/2Km
  • Single-Mode Fiber: 1310nm, 1550nm
  • Transmission Distance: 20/40/60/80/100/120km
• Performance Specification
  • Bandwidth: 10.8Gbps
  • MAC Address: 2K
  • Packet Neck Scarfer Memory: 1M
  • Packet Forwarding Rate: 8Mpps
  • Forwarding Mode: Store-And-Forward
• Power Supply
  • Product Input Voltage: AC100-240V 50/60Hz
  • Output: 52V5.76A, Power Budget: 300W
• Led indicator:
  • PWR - Power supply indicator(Red):
    • Lighting: Powered
    • Un-Light: No Power
  • SW - DIP indicator(Green):
    • OFF: Normal
    • Vlan: Lighting
    • Extend: Slow flash
  • 1-27 - RJ-45 ACT indicator(Green):
    • Lighting: Connecting
    • Flashing: Data Transmit
    • Un-Light: Disconnect
• MTBF: 100,000 hours
• Product Dimensions: 32 x 21 x 4.6 cm
• Product Weight: 1900g

WHAT'S IN THE BOX:

• Cudy FS1026PS1 26-Port 10/100M PoE+ Switch with 1 FSP Slot - Grey x1
• Power Adapter x1

The Cudy GS1028PS2 26-Port Gigabit PoE+ Switch offers the forwarding capacity to simultaneously process traffic on all ports at a line rate without any packet loss. It supports a switching capacity of up to 56Gbps and features 24 PoE ports and 2 SFP combo ports.

The 26 port switch supports 300W total PoE power and up to 30W for one PoE port. For additional protection, it features power auto-detection for devices. This feature will not burn non-standard PoE devices or normal PoE switches. A VLAN mode helps isolate the ports from each other for even further protection. It also complies with IEEE802.3af/at Standard speeds for great performance.

Used for many applications the Cudy GS1028PS2 works with IP Cameras for home, office or small businesses. It also works well with VoIP phones for business conferences and WiFi APs for the office and businesses. It even features a CCTV mode for longer distances up to 250 meters.

Its simple plug-and-play interface makes it incredibly easy to use. Its sturdy design is made from high-quality metal. This gives you a longer service life and provides better heat dissipation, making it suitable for most environments. It also features a fanless design for silent operation.

FEATURES:

• IEEE 802.3af / 802.3at standard compliant
• 300 watts total PoE power budget, up to 30-watt per port
• 24 x GbE PoE+ Port + 2 x SFP Port
• CCTV Mode supports remote power&data feeding up to 250 meters
• VLAN mode supports 24 POE+ ports isolated from each other
• LED indicators for network diagnostics
• 19-inch metal case, internal power design

SPECIFICATIONS:

• PoE standard: IEEE802.3af, IEEE802.3at
• Network Media(Cable):
  • 10BASE-T: UTP category 3,4,5 cable (≤100m)
    100BASE-TX: UTP category 5 cable (≤100m)
    1000BASE-T: UTP category 5e cable (≤100m)
    1000BASE-X: MMF or SMF SFP module
• MAC Address Table: 8K, Auto-learning, Auto-aging
• Transfer mode: Store-and-Forward
• Frame Forward Rate:
  • 10Base-T: 14881pps/Port
  • 100Base-TX: 148810pps/Port
  • 1000Base-T/X: 1488095pps/Port
• Switching Capacity: 56Gbps
• Fan: 2/Fanless
• Power Input: AC: AC: 100~240V, 50/60Hz
• PoE Port: Port1~24
• PoE Power on RJ45: Mode A  1/2(-),3/6(+)
• PoE Power Output: 32W(Max)
• Product Dimensions: 44 x 20.7 x 4.4 cm

WHAT'S IN THE BOX:

• Cudy GS1028PS2 26-Port Gigabit PoE+ Switch - Grey x1
• Power Adapter x1

The Cudy POE220 30W Gigabit 2 Channel PoE+/PoE Injector allows you to easily supply power and data to multiple PoE devices. It features 2 Gigabit Ethernet input ports for data and 2 Gigabit PoE output ports. It’s a great option for small surveillance systems or a VOIP phone or a WiFi AP. The Cudy POE220 eliminates the need for an external power supply. This allows you to get rid of its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over your existing Ethernet infrastructure.

The 4 port switch supports 30W total PoE power on the PoE output ports. It complies with IEEE802.3af/at Standard speeds for great performance. The Injector is powered by an AC power adapter and can be easily mounted to a wall.

Used for many applications the Cudy POE220 works with IP Cameras for home, office or small businesses. It also works well with VoIP phones for business conferences and WiFi APs for the office and businesses. Its simple plug and play interface makes it incredibly easy to use.

FEATURES:

• Full IEEE 802.3af IEEE 802.3at Compliant
• Up to 30W of power output on 2-pairs for per port
• Auto-detect of POE IEEE 802.3af IEEE 802.3at equipment
• Supports 10/100/1000Base-T applications
• LED indicators AC power input and POE output
• Distance up to 100 meters
• Internal AC/DC converter – no need for an external power brick
• Easy plug-and-play installation
• Surge protection

SPECIFICATIONS:

• No. of channels: 2
• Pass-through Data Rates: 10/100/1000Mbps
• Power over Ethernet Output:
  • Pin Assignment and Polarity:
    • 1/2 (-), 3/6 (+),
    • Output Power Voltage: 54Vdc
    • User Port Power: Up to 30W per port
• Input Power Requirements:
  • AC Input Voltage: 100 to 240 Vac
  • AC Input Current: 0.8A 100-240 Vac
  • AC Frequency: 50 to 60 Hz
• Indicators:
  • System Indicator: AC Power
  • User Indicator: Channel Power
• Connectors: Shielded RJ-45, EIA 568A and 568B
• Regulatory Compliance:
  • IEEE 802.3af (15.4W)
  • IEEE 802.3at (30W)
• Product Dimensions: 13.1 x 7 x 4 cm
• Product Weight: 420g

WHAT'S IN THE BOX:

• Cudy POE220 30W Gigabit 2 Channel PoE+/PoE Injector - Black x1
• Power Adapter x1

Connect your Bluetooth device to your laptop or desktop with the WINX CONNECT Simple Bluetooth 5.1 Adapter. This compact dongle features Bluetooth 5.1, allowing for transfer speeds of up to 3Mbps. Compatible with keyboards, mice, printers, headsets, game controllers, and other Bluetooth devices. Driver free from Windows 8 and above; driver needed for Linux.

FEATURES:

• Bluetooth 5.1 support
• Connect Bluetooth peripherals to your laptop or desktop
• Plug & Play*
• Offers up to 3Mbps data transmission
• Slim & compact for those always on-the-go

SPECIFICATIONS:

• Bluetooth version: 5.1 Dual Mode
• Transfer speed: 3Mbps
• Compatibility: Windows / Linux
• Range: 20m
• Supported voltage: 5V
• Product Dimensions: 2.2x1.7x0.7mm
• Product weight: 2g

WHAT'S IN THE BOX:

• WINX CONNECT Simple Bluetooth 5.1 Adapter x1

The Cudy GS108 8-Port Gigabit Desktop Switch allows you to manage your home network with ease. It supports bandwidth speeds of up to 16Gbps and features 6 Ethernet ports and 2 uplink ports. Its high-speed RJ-45 connectors support any 10/100/1000Mbps Ethernet devices.

For additional protection, it features a VLAN mode which helps isolate the ports from each other. The IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode offer increased bandwidth to alleviate network congestion, making the switch work reliably.

Used for many applications the Cudy GS105 works with IP Cameras for home, office or small businesses. It also works well with PCs, printers and access points in your home or office, making it ideal for small businesses. It even features an Extend mode for longer distances up to 250 meters.

Its simple plug and play interface makes it incredibly easy to use. Its sturdy design is made from high-quality metal. This gives you a longer service life and provides better heat dissipation, making it suitable for most environments. It also features a fanless design for silent operation.

FEATURES:

• Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3x and IEEE 802.3ab standards
• 8 10/100/1000Mbps Auto-Negotiation, Auto-MDI/MDIX ports provide smart switching between 10Mbps, 100Mbps and 1000Mbps hardware
• Non-blocking switching architecture enables full wire-speed packets forwarding and filtering
• Store-and-Forward switching method
• Supports 16K MAC address auto-learning & auto-ageing

SPECIFICATIONS:

• Standard configuration: 8 10/100/1000M RJ-45 adaptive ports
• Switching Capacity: 16Gbps
• Throughput: 11.9Mpps
• Packet Neck Scarfer: 2.5M
• MAC Address: 1K
• Jumbo Frame: 2K
• Transfer Mode: Store and forward
• MTBF: 100000 hour
• Network protocol:
  • IEEE802.3 (10Base-T)
  • IEEE802.3u (100Base-TX)
  • IEEE802.3ab (1000Base-TX)
  • IEEE802.3x (Flow control)
• Industry Standard
  • EMI: FCC Part 15 CISPR (EN55032) class A
  • EMS: EN61000-4-2 (ESD), EN61000-4-4 (EFT)
  • Shock: IEC 60068-2-27
  • Free Fall: IEC 60068-2-32
  • Vibration: IEC 60068-2-6
• Network Medium:
  • 10Base-T: Cat3, 4, 5 or above UTP(≤100m)
  • 100Base-TX: Cat5  or above UTP(≤100m)
  • 1000Base-TX: Cat5 or above UTP(≤100m)
• LED Indicators:
  • PWR (Power indicator)
  • Link (Network Link)
  • LOOP (Loop alarm)
• DIP Switch:
• VLAN: Port Isolation, 1-6 ports are isolated each other, all communicate with uplink port 7/8
• Default: Default mode, Support loop alarm
• Extend: Monitor Mode, 1-6 ports support 100M speed reduction negotiation, support 250 meters in 10Mbps/s mode,  port 7 and port 8 as an uplink port
• Power Voltage:
  • Power Input Voltage: AC 100-240 V
  • Switch Input Voltage: DC 5V
• Product Dimensions: 13.7 x 7.7 x 2.5 cm
• Product Weight: 300g

WHAT'S IN THE BOX:

• Cudy GS108 8-Port Gigabit Desktop Switch - Black x1
• Power Adapter x1
• Quick Install Guide x1

The Xiaomi Mi Smart Standing Fan 2 features smart control with support for the Mi Home app, Google Assistant and Amazon Alexa. This allows you to control the fan with your voice for a hands-free smart experience.

The Xiaomi Mi Smart Standing Fan 2 features two layers of fan blades that rotate simultaneously. This gives you increased airflow for more powerful cooling and with its wider reach, the dual blades also provide a more gentle three-dimensional breeze. You can easily switch between natural breeze or direct blow with fan speeds ranging from anything between 1 and 100 for fine-tuning. This can all be done in the Mi Home app, to achieve your desired airflow.

The Mi Smart Standing Fan 2 uses a DC copper-wire motor, which has higher operating efficiency and longer service life than an aluminium-wire motor. It also provides constant speed for more stable ventilation and lowers power consumption. To top it all off its wing-shaped blades produce a maximum airflow of 20m³/min.

The Fan is also very versatile, allowing for usage that is perfect for any room. Its innovative design allows you simply press a button to easily adjust the height of the stand. This allows you to place it on top of a table or on the floor for convenience.

Its ultra-wide angle of 140° provides great ventilation and can increase airflow. This adjustable wide-angle ventilation with a maximum range of 14m is able to cool the room for the whole family.

With its smooth-running brushless DC motor and dual fan blades, the fan has been optimized to deliver an exceptionally quiet and disturbance-free experience. Thanks to a minimal operating noise of as little as 30.2dB(A), the Fan 2 can be as quiet as spending some time in a library.

FEATURES:

• Voice Control - Google Assistant, Mi Home and Alexa Support
• Dual Blades - Surround Yourself with a Natural Breeze
• DC Motor - Reducing Power Consumption
• 14m Range - Long-range Ventilation
• 100 Levels - Fine Wind Speed Adjustment
• Table and Floor - Place it Wherever You Like
• 140° Ventilation - Cools The Whole Room
• Silent All Night - Noise as Low as 30.2 dB(A)

SPECIFICATIONS:

• Airflow: 20m³/min
• Noise emission: ≤58dB(A)
• Rated frequency: 50/60Hz
• Rated voltage: 100–240V
• Rated power: 15W
• Model Authorization Number: CMIIT ID 2017DP7231 Radio transmission module
• Dimensions: 34.3 × 33 × 100 cm
• Weight: 3000g

WHAT'S IN THE BOX:

• Xiaomi Mi Smart Standing Fan 2 - White x1

The Cudy FS1010PG 10-Port 10/100M PoE+ Switch allows you to manage your home or office network with ease. It features 8 Ethernet PoE ports and 2 uplink ports. Its RJ-45 connectors support any 10/100Mbps Ethernet devices and its compliant with IEEE 802.3af/802.3at network standards.

Used for many applications the Cudy FS1010PG works with IP Cameras for home, office or small businesses. It also works well with PCs, printers and access points in your home or office, making it ideal for small businesses. It even features a VLAN mode for additional security, this allows the ports to be isolated from one another.

Its simple plug and play interface makes it incredibly easy to use. Its sturdy design is made from high-quality metal. This gives you a longer service life and provides better heat dissipation, making it suitable for most environments. It also features a built-in fan and venting holes to help dissipate heat quickly and ensure stable product operation. The Cudy FS1010PG can also be easily mounted to a wall or onto a rack to make installation more convenient.

Watchdog guarantees the uninterrupted operation of your PoE devices. The PoE watchdog continuously monitors the connection status of remote hosts. If an error is detected on the remote PoE device, the PoE switch immediately restarts the device to bring it back to normal operation.

FEATURES:

• Support IEEE802.3at and IEEE802.3af Standard
• 120W PoE power output totally, up to 32W for one PoE port
• Support IEEE802.3x full-duplex and half-duplex flow control
• Support VLAN and CCTV Function
• Panel lights to monitor working state and help fault analysis
• Perfect security mechanism
• Line-speed forwarding intelligent identification

SPECIFICATIONS:

• PoE standard: IEEE802.3af/at
• Interface: 10 x 10/100Mbps The RJ45 port through consultation
• Key function: CCTV&VLAN
• PoE port: 1~8 port
• PoE Total: 120W
• Power supply: 120W
• RJ45 PoE power supply: Mode A, Anode1/2, Cathode3/6
• PoE output-port: Max 32W
• Indicator: PWR, LNK/ACT, PoE
• Network media:
  • 10BASE-T: UTP category 3, 4, 5 cable(≤100m)
  • 100BASE-TX: UTP category 5, 5e cable(≤100m)；
• MAC Address Table: 8K, Automatic study, automatic updates
• Jumbo frame: 1528Bytes
• Packet Neck Scarfer: 2M bit
• Transfer Mode: Store-and-forward
• Packet forwarding rate: 1.48Mpps
• Bandwidth: 2M bit
• Fan: Fanless
• Mains Input: 100~240V AC, 50/60Hz
• Green energy saving: Support IEEE（802.3az)
• Surge Protection: ±4KV
• MTBF: >50000 hour
• Electrostatic standard: Contact 4KV, air 6KV
• Colour: Grey
• Product Dimensions: 22 x 15 x 4.4 cm
• Product Weight: 1000g

WHAT'S IN THE BOX:

• Cudy FS1010PG 10-Port 10/100M PoE+ Switch - Grey x1
• Power Adapter x1

The AMX FX10 3 Layer HEPA Filter Box is made from a high-quality DKP material with an electrostatic powder coating for protection. This gives it a smooth sleek surface with heat resistance and anti-corrosion properties. Its 3 layer protection filtration system offers the protection performance for ventilation. The Primary efficiency filter, Activated carbon filter, and HEPA 12 high-efficiency filter purify your air easily and effectively. The FX10 can also be used with a silent fan, which is suitable for a variety of small hidden installation environments where ventilation is needed.

FEATURES:

• 3 Layer Filtration System
• Primary, Active Carbon and HEPA Filter
• High Efficiency
• Electrostatic Powder Coated Surface
• Heat Resistance
• Elegant Design

SPECIFICATIONS:

• Appliance volume: 100-300 m3/h
• Initial Resistance: 30-70 Pa
• Duct Size: 100mm
• Product Size: 40 x 36.9 x 21.3 cm
• Product Weight: 4300g

WHAT'S IN THE BOX:

• AMX FX10 100mm 3 Layer HEPA Filter Box x1

The AMX FX15-RF 3-in-1 150mm Replacement Filter Pack is a great way to service your AMX FX15 150mm 3 Layer HEPA Filter Box. It comes with 3 replacement filters that offer high-efficiency filtration and is easy to install. The pack consists of a Primary Filter, an Active Carbon Filter, and HEPA 12 Filter for high-performance protection. Each 150mm sized filter fits into the AMX FX15 Filter Box whenever ventilation maintenance is needed.

FEATURES:

• 3 Layer Replacement Filtration System
• Primary, Active Carbon and HEPA Filter
• High Efficiency
• Easy to Install
• Designed for AMX FX15 Filter Box

SPECIFICATIONS:

• Number of Filters: 3
• Filters:
  • Primary Filter
  • Active Carbon  Filter
  • HEPA 12 Filter
• Compatibility: AMX FX15 Filter Box

WHAT'S IN THE BOX:

• AMX FX15-RF 150mm Replacement Primary Filter x1
• AMX FX15-RF 150mm Replacement Active Carbon Filter x1
• AMX FX15-RF 150mm Replacement HEPA 12 Filter x1

The Xiaomi 33W Wall Charger has a maximum output capacity of 33W, comparable to in-box chargers and is equipped with a Type-C which supports dual-port insertion. This makes the charger much more convenient, easy to use and hassle-free. The charger is compatible with fast charging on various devices, whether it is a Xiaomi smartphone or an iPhone. You can leave your charging worries behind and go make yourself a cup of coffee or read a book instead.

The wall charger is equipped with both Type-C and USB-A dual output ports, allowing you to charge multiple devices simultaneously. It can identify the output current, and meet the charging requirements of most smart home and entertainment devices.

With its compact and portable design, the charger fits in most bags without taking up unnecessary space, and you won't need more than one for travelling. The Mi 33W Wall Charger also features multiple safety systems, offering total protection to you and your devices for a safe and worry-free experience.

FEATURES:

• 33W high power output
• Dual output ports
• USB-A and Type-C
• PD fast charging
• Compact and portable

SPECIFICATIONS:

• Colour: White
• Input: 90~264Vac ~ 47/63Hz, 1.1A
• Output ports: Type-C + USB-A
• Output Type-C: 5V/3A, 9V/3A, 11V/3A, 12V/2.5A, 15V/2A，20V/1.65A，33W MAX
• Output USB-A: 5V/3A, 9V/3A, 12V/2.25A，27W MAX
• Product Dimensions: 8.4 x 4.8 x 2.8 cm

WHAT'S IN THE BOX:

• Xiaomi 33W Wall Charger - White x1

The Xiaomi Mi Electric Precision Screwdriver Kit features 24 Wiha Precision Bits made from imported S2 steel that also comes with a special anti-rust treatment that helps your kit last for a longer time making it extremely reliable. The screwdriver is powered by a strong magnetic motor that reaches a maximum speed of 200RPM. It also features two-speed precision torque adjustment modes for use with notebooks and electronics and more precise items such as mobile phones, watches and glasses.

The bits are engineered to deliver super high precision for perfect usage. The imported S2 steel bits are tough and durable offering a hardness level of up to 60HRC, while the built-in rechargeable lithium battery is powerful and long-lasting, it can also process about 400+ precision screws on one full charge.

The magnetic box helps hold all the screws in place so that they do not fall off. Now you never have to worry about losing the bits. Made from a high-precision one-piece moulding process, it features smooth round edges for a comfortable grip. Its sand-blasted surface also protects against moisture and corrosion.

The Xiaomi Mi Electric Precision Screwdriver Kit meets most daily repair needs and is suitable for all conventional household appliances like quartz watches, laptops, cameras, radios, computers, mobile phones, drones, etc. You do not have to be a pro to use this product as fixing things with this kit is extremely easy.

FEATURES:

• Strong Magnetic Motor
• Two-speed Precision Torque Adjustment
• 24 Anti-rust Precision Bits
• Aluminium Alloy Cover
• Magnetic Push Pop-up Box
• Aluminium Alloy Handle
• Type-C Charging Port
• Perfect for repairs on smaller electronics around the house

SPECIFICATIONS:

• Colour: Dark Grey
• Handle and Case Material: Aluminium
• Bit Material: Imported S2 Steel
• Maximum Speed: 200 RPM
• How to Open: Press to open
• Type of Bits: PH000/PH00/PH0/PH1/H0.7/H0.9/H1.5/H2.0/SL1.5/SL2.0/T2/T3/T4/T5H/T6H/T8H/T9H/T10H/ P2/P5/W1.5/Y0.6/Y1/△2.3
• Screwdriver Dimensions: 15.9 x Φ1.6 cm
• Product Dimensions: 20.2 x 7.4 x 2.5 cm
• Product Weight: 353 g

WHAT’S IN THE BOX:

• Xiaomi Mi Electric Precision Screwdriver Kit x1

The AMX FX20-RF 3-in-1 200mm Replacement Filter Pack is a great way to service your AMX FX20 200mm 3 Layer HEPA Filter Box. It comes with 3 replacement filters that offer high-efficiency filtration and is easy to install. The pack consists of a Primary Filter, an Active Carbon Filter, and HEPA 12 Filter for high-performance protection. Each 200mm sized filter fits into the AMX FX20 Filter Box whenever ventilation maintenance is needed.

FEATURES:

• 3 Layer Replacement Filtration System
• Primary, Active Carbon and HEPA Filter
• High Efficiency
• Easy to Install
• Designed for AMX FX20 Filter Box

SPECIFICATIONS:

• Number of Filters: 3
• Filters:
  • Primary Filter
  • Active Carbon  Filter
  • HEPA 12 Filter
• Compatibility: AMX FX20 Filter Box

WHAT'S IN THE BOX:

• AMX FX20-RF 200mm Replacement Primary Filter x1
• AMX FX20-RF 200mm Replacement Active Carbon Filter x1
• AMX FX20-RF 200mm Replacement HEPA 12 Filter x1

The AMX FX20 3 Layer HEPA Filter Box is made from a high-quality DKP material with an electrostatic powder coating for protection. This gives it a smooth sleek surface with heat resistance and anti-corrosion properties. Its 3 layer protection filtration system offers the protection performance for ventilation. The Primary efficiency filter, Activated carbon filter, and HEPA 12 high-efficiency filter purify your air easily and effectively. The FX20 can also be used with a silent fan, which is suitable for a variety of small hidden installation environments where ventilation is needed.

FEATURES:

• 3 Layer Filtration System
• Primary, Active Carbon and HEPA Filter
• High Efficiency
• Electrostatic Powder Coated Surface
• Heat Resistance
• Elegant Design

SPECIFICATIONS:

• Appliance volume: 600-1200 m3/h
• Initial Resistance: 100-120 Pa
• Duct Size: 200mm
• Product Size: 43.3 x 39.6 x 26.3 cm
• Product Weight: 5500g

WHAT'S IN THE BOX:

• AMX FX20 200mm 3 Layer HEPA Filter Box x1

Take the next evolutionary leap with the performance hybrid architecture of 12th Generation Intel® Core™ processors. Get the performance you need, where you need it, whether you’re a gamer, creator, streamer, or everyday user. Whatever you’re into, do more of it, whenever you want with Intel® 12 Generation processors. With unprecedented new performance hybrid architecture, 12th Gen Intel® Core™ processors offer a unique combination of Performance and Efficient-cores (P-core and E-core). That means real-world performance, intuitively scaled to match whatever you’re doing.

The Performance-core is Intel’s highest-performing CPU core ever. And it’s designed to maximize single-thread performance and responsiveness for compute-intensive workloads like gaming and 3D design. The Efficient-core delivers multithreaded performance for tasks that can run in parallel (like image rendering), along with efficient offload of background tasks for modern multitasking.

So that Performance-cores and Efficient-cores can work seamlessly with the operating system, Intel built Intel® Thread Director right into the hardware. Automatically monitoring and analyzing on-the-fly, Intel® Thread Director guides the operating system, helping it place the right thread on the right core, at the right time. And it does it all dynamically, adapting scheduling guidance based on actual computing needs, not on static rules.

12th Gen Intel® Core™ processors also support the next wave of discrete graphics cards and storage devices. These devices take advantage of increased throughput coming with PCIe 5.0 as well the higher speeds and bandwidth of DDR5 memory. With 12th Gen Intel® Core™ processors, standard, built-in features enable capabilities like noise suppression, auto-framing, and optimization for bandwidth and video resolution while gaming. That saves you time and lets you multitask in ways you’ve only ever dreamed of, until now. From epic gaming to browsing to streaming to creating your next masterpiece, 12th Gen Intel® Core™ processors make it all entirely doable.

FEATURES:

• 12 Cores
• 20 Threads
• Max Turbo Frequency of up to 4.90GHz
• 25MB Intel® Smart Cache
• Support for DDR4 and DDR5 memory
• Built for serious gaming
• Smart solutions for enthusiasts and creators
• Nearly 3x faster connectivity

SPECIFICATIONS:

• Essentials:
  • Product Collection: 12th Generation Intel® Core™ i7 Processors
  • Code Name: Products formerly Alder Lake
  • Vertical Segment: Desktop
  • Processor Number: i7-12700
  • Socket Supported: FCLGA1700
• CPU Specifications:
  • Total Cores: 12
  • # of Performance-cores: 8
  • # of Efficient-cores: 4
  • Total Threads: 20
  • Max Turbo Frequency: 4.90 GHz
  • Intel® Turbo Boost Max Technology 3.0 Frequency: 4.90 GHz
  • Performance-core Max Turbo Frequency: 4.80 GHz
  • Efficient-core Max Turbo Frequency: 3.60 GHz
  • Performance-core Base Frequency: 2.10 GHz
  • Efficient-core Base Frequency: 1.60 GHz
  • Cache: 25 MB Intel® Smart Cache
  • Total L2 Cache: 12 MB
  • Processor Base Power: 65 W
  • Maximum Turbo Power: 180 W
• Memory Specifications:
  • Max Memory Size (dependent on memory type): 128 GB
  • Memory Types:
    • Up to DDR5 4800 MT/s
    • Up to DDR4 3200 MT/s
  • Max # of Memory Channels: 2
  • Max Memory Bandwidth: 76.8 GB/s
• Processor Graphics:
  • Processor Graphics: Intel® UHD Graphics 770
  • Graphics Base Frequency: 300 MHz
  • Graphics Max Dynamic Frequency: 1.50 GHz
  • Graphics Output: eDP 1.4b, DP 1.4a, HDMI 2.1
  • Execution Units: 32
  • Max Resolution (HDMI): 4096 x 2160 @ 60Hz
  • Max Resolution (DP): 7680 x 4320 @ 60Hz
  • Max Resolution (eDP - Integrated Flat Panel): 5120 x 3200 @ 120Hz
  • DirectX* Support: 12
  • OpenGL* Support: 4.5
  • Multi-Format Codec Engines: 2
  • Intel® Quick Sync Video: Yes
  • Intel® Clear Video HD Technology: Yes
  • # of Displays Supported: 4
  • Device ID: 0x4680
  • OpenCL Support: 2.1
• Expansion Options:
  • Direct Media Interface (DMI) Revision: 4.0
  • Max # of DMI Lanes: 8
  • Scalability: 1S Only
  • PCI Express Revision: 5.0 and 4.0
  • PCI Express Configurations: Up to 1×16+4, 2×8+4
  • Max # of PCI Express Lanes: 20
• Advanced Features:
  • Intel® Gaussian & Neural Accelerator: 3.0
  • Intel® Thread Director: Yes
  • Intel® Deep Learning Boost (Intel® DL Boost): Yes
  • Intel® Optane™ Memory Supported: Yes
  • Intel® Speed Shift Technology: Yes
  • Intel® Turbo Boost Max Technology 3.0: Yes
  • Intel® Turbo Boost Technology: 2.0
  • Intel® Hyper-Threading Technology: Yes
  • Intel® Virtualization Technology (VT-x): Yes
  • Intel® 64: Yes
  • Instruction Set: 64-bit
  • Instruction Set Extensions: Intel® SSE4.1, Intel® SSE4.2, Intel® AVX2
  • Idle States: Yes
  • Enhanced Intel SpeedStep® Technology: Yes
  • Thermal Monitoring Technologies: Yes
  • Intel® Volume Management Device (VMD): Yes
• Security & Reliability
  • Intel vPro® Platform Eligibility: Yes
  • Intel vPro® Enterprise Platform Eligibility: Yes
  • Intel vPro® Essentials Platform Eligibility: Yes
  • Intel® Threat Detection Technology (TDT): Yes
  • Intel® Active Management Technology (AMT): Yes
  • Intel® Standard Manageability (ISM): Yes
  • Intel® One-Click Recovery: Yes
  • Intel® Hardware Shield Eligibility: Yes
  • Intel® AES New Instructions: Yes
  • Secure Key: Yes
  • Intel® OS Guard: Yes
  • Intel® Trusted Execution Technology: Yes
  • Execute Disable Bit: Yes
  • Intel® Boot Guard: Yes
  • Mode-based Execute Control (MBEC): Yes
  • Intel® Control-Flow Enforcement Technology: Yes
  • Intel® Total Memory Encryption - Multi Key: Yes
  • Intel® Total Memory Encryption: Yes
  • Intel® Stable IT Platform Program (SIPP): Yes
  • Intel® Virtualization Technology with Redirect Protection (VT-rp): Yes
  • Intel® Virtualization Technology (VT-x): Yes
  • Intel® Virtualization Technology for Directed I/O (VT-d): Yes
  • Intel® VT-x with Extended Page Tables (EPT): Yes

WHAT’S IN THE BOX:

• Intel 12th Gen Core i7-12700 LGA1700 1.6GHz 12-Core CPU x1

Keep your laptop fully charged with the FSP NB Slim PRO 120W Universal Laptop Adapter. It features an output wattage of 120W and an output voltage of 19V. Ideal for a wide variety of laptops, the power adapter comes with additional exchangeable tips for various laptop and notebook charging ports. This makes it more versatile than a traditional power adapter that only has one port for your laptop only. Now you can take one charger with you for multiple devices. It's high-efficiency rating also ensures you get constant and reliable power to your devices at all times.

For additional safety, it features 360° safety circuit protection, which means you get over circuit protection(OVP), over-voltage protection(OVP), short circuit protection(SCP), and over-temperature protection(OTP) which helps prevent damage during use. With all these great features the FSP NB Slim PRO 120W is a great choice for anyone looking to add safe, reliable power to their laptop.

This model comes with tip No.1, No.2, No.3, No.4, No.5, No.8, No.9, No.10, No.U8 and No.U9 for a variety of laptops.

FEATURES:

• 120W Output Wattage
• 19V Output Voltage
• Compatible with a variety of Laptops
• Exchangeable Tips
• High Efficiency ≥ 88%
• OCP, OVP, SCP and OTP Protection
• Tip No 1, 2, 3, 4, 5, 8, 9, 10, U8 and U9 Included

SPECIFICATIONS:

• Product Name: NB Slim PRO 120
• Output Wattage: 120W
• Output Voltage: 19V
• Output Current: 6.32A
• Input Voltage: 100-240V
• Input Frequency: 50-60Hz
• Protection: OCP, OVP, SCP, OTP
• Number of Tips: 10
• Included Tips:
  • No.1: 4.75 (Outer)/1.7 (Inner)/Yellow
  • No.2: 5.5 (Outer)/1.7 (Inner)/Orange
  • No.3: 5.5 (Outer)/2.1 (Inner)/Blue
  • No.4: 5.5 (Outer)/2.5 (Inner)/White
  • No.5: 6.3 (Outer)/3 (Inner)/Green
  • No.10: 5.5 (Outer)/1 (Outer)/Yellow
  • No.8: 7.9 (Outer)/0.9 (Inner)/ Black
  • No.U8: 11 (Outer)/4.7 (Inner)/ Yellow
  • No.9: 7.4 (Outer)/0.6 (Inner)/ Red
  • No.U9: 4.5 (Outer)/3 (Inner)/ Blue
• Product Dimensions: 15.1 x 7.6 x 2.5 cm
• Product Weight: 415g

WHAT'S IN THE BOX:

• FSP NB Slim PRO 120W Universal Laptop Adapter x1
• Exchangeable Tips x10
• User Manual x1

Keep your laptop fully charged with the FSP NB PRO 90W Universal Laptop Adapter. It features an output wattage of 90W and an output voltage of 19V. Ideal for Asus laptops, the power adapter comes with additional exchangeable tips for various laptop and notebook charging ports. This makes it more versatile than a traditional power adapter that only has one port for your laptop only. Its high-efficiency rating ensures you get constant and reliable power to your devices at all times.

For additional safety, it features 360° safety circuit protection, which means you get over circuit protection(OVP), over-voltage protection(OVP), short circuit protection(SCP), and over-temperature protection(OTP) which helps prevent damage during use. With all these great features the FSP NB PRO 90W is a great choice for anyone looking to add safe, reliable power to their laptop.

This model comes with tip No.4, No.15 and No.U5 for Asus laptops only.

FEATURES:

• 90W Output Wattage
• 19V Output Voltage
• Compatible with Asus Laptops
• Exchangeable Tips
• High Efficiency ≥ 88%
• OCP, OVP, SCP and OTP Protection
• Tip No 4, 15 and U5 Included

SPECIFICATIONS:

• Product Name: NB PRO 90
• Output Wattage: 90W
• Output Voltage: 19V
• Output Current: 4.74A
• Input Voltage: 100-240V
• Input Frequency: 50-60Hz
• Protection: OCP, OVP, SCP, OTP
• Included Tips:
  • No.4: 5.5 (Outer)/2.5 (Inner)/ White
  • No.15: 4.5 (Outer)/3 (Inner)/ Red
  • No.U5: 4 (Outer)/1.1 (Inner)/ Red
• Product Dimensions: 12.9 x 5.1 x 3.1 cm
• Product Weight: 297g

WHAT’S IN THE BOX:

• FSP NB PRO 90W Universal Laptop Adapter – Asus x1
• Exchangeable Tips x3
• User Manual x1

Take the next evolutionary leap with the performance hybrid architecture of 12th Generation Intel® Core™ processors. Get the performance you need, where you need it, whether you’re a gamer, creator, streamer, or everyday user. Whatever you’re into, do more of it, whenever you want with Intel® 12 Generation processors. With unprecedented new performance hybrid architecture, 12th Gen Intel® Core™ processors offer a unique combination of Performance and Efficient-cores (P-core and E-core). That means real-world performance, intuitively scaled to match whatever you’re doing.

The Performance-core is Intel’s highest-performing CPU core ever. And it’s designed to maximize single-thread performance and responsiveness for compute-intensive workloads like gaming and 3D design. The Efficient-core delivers multithreaded performance for tasks that can run in parallel (like image rendering), along with efficient offload of background tasks for modern multitasking.

So that Performance-cores and Efficient-cores can work seamlessly with the operating system, Intel built Intel® Thread Director right into the hardware. Automatically monitoring and analyzing on-the-fly, Intel® Thread Director guides the operating system, helping it place the right thread on the right core, at the right time. And it does it all dynamically, adapting scheduling guidance based on actual computing needs, not on static rules.

12th Gen Intel® Core™ processors also support the next wave of discrete graphics cards and storage devices. These devices take advantage of increased throughput coming with PCIe 5.0 as well the higher speeds and bandwidth of DDR5 memory. With 12th Gen Intel® Core™ processors, standard, built-in features enable capabilities like noise suppression, auto-framing, and optimization for bandwidth and video resolution while gaming. That saves you time and lets you multitask in ways you’ve only ever dreamed of, until now. From epic gaming to browsing to streaming to creating your next masterpiece, 12th Gen Intel® Core™ processors make it all entirely doable.

FEATURES:

• 4 Cores
• 8 Threads
• Max Turbo Frequency of up to 4.30GHz
• 12MB Intel® Smart Cache
• Support for DDR4 and DDR5 memory
• Built for serious gaming
• Smart solutions for enthusiasts and creators
• Nearly 3x faster connectivity

SPECIFICATIONS:

• Essentials:
  • Product Collection: 12th Generation Intel® Core™ i3 Processors
  • Code Name: Products formerly Alder Lake
  • Vertical Segment: Desktop
  • Processor Number: i3-12100
• CPU Specifications:
  • Total Cores: 4
  • # of Performance-cores: 4
  • # of Efficient-cores: 0
  • Total Threads: 8
  • Max Turbo Frequency: 4.30 GHz
  • Performance-core Max Turbo Frequency: 4.30 GHz
  • Performance-core Base Frequency: 3.30 GHz
  • Cache: 12 MB Intel® Smart Cache
  • Total L2 Cache: 5 MB
  • Processor Base Power: 60 W
  • Maximum Turbo Power: 89 W
• Memory Specifications:
  • Max Memory Size (dependent on memory type): 128 GB
  • Memory Types:
    • Up to DDR5 4800 MT/s
    • Up to DDR4 3200 MT/s
  • Max # of Memory Channels: 2
  • Max Memory Bandwidth: 76.8 GB/s
• Processor Graphics:
  • Processor Graphics: Intel® UHD Graphics 730
  • Graphics Base Frequency: 300 MHz
  • Graphics Max Dynamic Frequency: 1.40 GHz
  • Graphics Output: eDP 1.4b, DP 1.4a, HDMI 2.1
  • Execution Units: 24
  • Max Resolution (HDMI): 4096 x 2160 @ 60Hz
  • Max Resolution (DP): 7680 x 4320 @ 60Hz
  • Max Resolution (eDP – Integrated Flat Panel): 5120 x 3200 @ 120Hz
  • DirectX Support: 12
  • OpenGL Support: 4.5
  • Multi-Format Codec Engines: 1
  • Intel® Quick Sync Video: Yes
  • Intel® Clear Video HD Technology: Yes
  • # of Displays Supported: 4
  • Device ID: 0x4692
  • OpenCL Support: 2.1
• Expansion Options:
  • Direct Media Interface (DMI) Revision: 4.0
  • Max # of DMI Lanes: 8
  • Scalability: 1S Only
  • PCI Express Revision: 5.0 and 4.0
  • PCI Express Configurations: Up to 1×16+4, 2×8+4
  • Max # of PCI Express Lanes: 20
• Advanced Features:
  • Intel® Gaussian & Neural Accelerator: 3.0
  • Intel® Thread Director: No
  • Intel® Deep Learning Boost (Intel® DL Boost): Yes
  • Intel® Optane™ Memory Supported: Yes
  • Intel® Speed Shift Technology: Yes
  • Intel® Turbo Boost Max Technology 3.0: No
  • Intel® Turbo Boost Technology: 2.0
  • Intel® Hyper-Threading Technology: Yes
  • Intel® 64: Yes
  • Instruction Set: 64-bit
  • Instruction Set Extensions: Intel® SSE4.1, Intel® SSE4.2, Intel® AVX2
  • Idle States: Yes
  • Enhanced Intel SpeedStep® Technology: Yes
  • Thermal Monitoring Technologies: Yes
  • Intel® Volume Management Device (VMD): Yes
• Security & Reliability
  • Intel® Threat Detection Technology (TDT): Yes
  • Intel® Standard Manageability (ISM): Yes
  • Intel® AES New Instructions: Yes
  • Secure Key: Yes
  • Intel® OS Guard: Yes
  • Execute Disable Bit: Yes
  • Intel® Boot Guard: Yes
  • Mode-based Execute Control (MBEC): Yes
  • Intel® Control-Flow Enforcement Technology: Yes
  • Intel® Virtualization Technology (VT-x): Yes
  • Intel® Virtualization Technology for Directed I/O (VT-d): Yes
  • Intel® VT-x with Extended Page Tables (EPT): Yes

WHAT’S IN THE BOX:

• Intel 12th Gen Core i3-12100 LGA1700 3.3GHz 4-Core CPU x1

Keep your laptop fully charged with the FSP NB PRO 90W Universal Laptop Adapter. It features an output wattage of 90W and an output voltage of 19V. Ideal for DELL laptops, the power adapter comes with additional exchangeable tips for various laptop and notebook charging ports. This makes it more versatile than a traditional power adapter that only has one port for your laptop only. Its high-efficiency rating ensures you get constant and reliable power to your devices at all times.

For additional safety, it features 360° safety circuit protection, which means you get over circuit protection(OVP), over-voltage protection(OVP), short circuit protection(SCP), and over-temperature protection(OTP) which helps prevent damage during use. With all these great features the FSP NB PRO 90W is a great choice for anyone looking to add safe, reliable power to their laptop.

This model comes with tip No.7, No.14 and No.U7 for DELL laptops only.

FEATURES:

• 90W Output Wattage
• 19V Output Voltage
• Compatible with DELL Laptops
• Exchangeable Tips
• High Efficiency ≥ 88%
• OCP, OVP, SCP and OTP Protection
• Tip No 7, 14 and U7 Included

SPECIFICATIONS:

• Product Name: NB PRO 90
• Output Wattage: 90W
• Output Voltage: 19V
• Output Current: 4.74A
• Input Voltage: 100-240V
• Input Frequency: 50-60Hz
• Protection: OCP, OVP, SCP, OTP
• Included Tips:
  • No.7: 7.4 (Outer)/0.6 (Inner)/ Black
  • No.14: 4 (Outer)/1.7 (Inner)/ Red
  • No.U7: 4.5 (Outer)/3 (Inner)/ Black
• Product Dimensions: 12.9 x 5.1 x 3.1 cm
• Product Weight: 297g

WHAT’S IN THE BOX:

• FSP NB PRO 90W Universal Laptop Adapter – DELL x1
• Exchangeable Tips x3
• User Manual x1

[embed]https://www.youtube.com/watch?v=8Vz9BLv0lCk[/embed]

The Xiaomi Smart Air Purifier 4 Lite offers you peace of mind and all-day protection for those who suffer from rhinitis and allergies. The air purifier protects your respiratory health by keeping the air in your home clean and safe to breathe. It does this thanks to a three-in-one filtration system that can remove up to 99.97% of 0.3μm particles. In addition to your high-efficiency filter system, your purifier also releases negative ions to keep the air fresh, helping you stay refreshed after a hard day’s work.

Xiaomi combines two filter technologies to give you the best protection. Xiaomi’s high-efficiency filter media can remove 99.97% of airborne particles of 0.3 micrometres in size and traps dust, PM 2.5, pollen, pet dander, smoke and tiny particles. The activated carbon filter has a high absorption rate and effectively removes common harmful gases such as VOC from your home, as well as eliminating odours to keep your air fresh.

Compared to a conventional HEPA filter, Xiaomi’s high-efficiency filter allows the air purifier to generate less noise and consume less energy by allowing more airflow to pass through the filter all the while keeping the same cleaning efficiency. Xiaomi Smart Air Purifier 4 Lite has a particle CADR of up to 360m³/h, able to deliver 6000L of purified air per minute, and with 360° all-round air intake, purifying your entire room is effortless.

Smart control keeps your home fresh when you’re on the move. With support for smart control, ensure that you always return to a home filled with clean, fresh air. Use the Mi Home/Xiaomi Home app from your smartphone to enable purification when away from home. The purifier also works with Hey Google and Alexa for voice control.

It also features a one-touch auto mode making it even more effective for hands-free purification. Its sensitive high-precision laser sensors then monitor changes in air quality. Once it determines the air quality in real-time it then automatically adjusts the purification speeds for automatic purification.

Switch to Night Mode to turn off display luminance for no-glare, no-noise purification. Your purifier will keep air circulating, providing you with the perfect environment for some undisturbed shut-eye.

Easy-clean air ducts help clean your purifier from the inside out. Unscrew and remove the grille for easy access to the fan blades and air ducts. This makes for easy cleaning for the inside of your purifier to prevent secondary pollution.

The air purifier is ideal for those suffering from allergies, or who live in areas where there is a lot of pollen. They are also perfect for newborn babies or children who need to still develop their immune systems. Improve your way of life with the Xiaomi Smart Air Purifier 4 Lite.

FEATURES:

• High-efficiency Filter
• High-precision Sensors
• Smart Control
• Suitable for 43㎡ room
• LED Touch Screen
• Filter replacement reminder
• Compact and Portable
• Quiet Operation

SPECIFICATIONS:

• CADR (Particles): 360 m³/h
• CADR (Formaldehyde): 120 m³/h
• Area efficiency: 120m² per hour [2]
• Purification efficiency: 99.97 %
• Filter Lifetime: 6~12 months
• Noise levels: 33.4~61dB
• Rated Voltage: AC100-240V~
• Rated Frequency: 50/60Hz
• Rated Power: 33W
• Filter Area: 2㎡
• Activated Carbon: 200g
• Effective Coverage Area: 25 – 43 m2
• Operational Keys: On-off, Modes, Luminance
• Air Quality Display: 4 Levels
• Colour: White
• Compatibility: Xiaomi Smart Air Purifier 4 Lite Filter - BHR5272GL
• Product Dimensions: 24 x 24 x 53.3 cm
• Product Net Weight: approx. 4800g

WHAT’S IN THE BOX:

• Xiaomi Smart Air Purifier 4 Lite – White x1
• Power Adapter x1
• Filter x1
• Instruction Book x1

Illuminate your workspace with the Xiaomi Mi Computer Monitor Light Bar. It features a bright rotating light bar that can be remotely controlled via the included remote. Its asymmetrical optical design only illuminates the desk and eliminates reflective glare off the screen, which is a great way to avoid eye fatigue.

The light bar allows for free adjustment for brightness and colour temperature to meet your different lighting requirements. The light bar can be rotated by 25 °to suit variable table and monitor height. This can be controlled wirelessly via remote control and can be turned on/off or adjusted remotely.

Power can be supplied through a computer, portable battery, or charger via the included Type-C charging cable. Installation is also made simple and neat by mounting on your monitor. This allows you to save extra desk space and have less clutter in your workspace.

FEATURES:

• Wireless Remote Control
• Save Desktop Space
• Stepless Brightness and Colour Temperature Adjustment
• No Screen Glare
• Magnetic Rotation Structure
• USB Interface for Power Supply

SPECIFICATIONS:

• Luminous Flux: 270 lm @3900 K
• Colour Temperature: 2700 – 6500 k
• CRI: Ra95
• Rated Input: 5 V = 1 A
• Rated Power: 5 W (80×0.2W/LED Model)
• Service Life: Approx. 25000 hours
• Wireless Connectivity: 2.4 GHz
• Operating Frequency:
• 2412–2472 MHz (Wi-Fi)
• 2402–2480 MHz (BT)
• Operating Temperature: -10°C ~ 40°C
• Light Dimensions: φ23 x 448mm
• Remoter Dimensions: φ23 x 448mm

WHAT'S IN THE BOX:

• Xiaomi Mi Computer Monitor Light Bar - Black x1
• Type-C Charging Cable x1
• Remote Control x1
• User Manual x1

The Xiaomi Smart Air Purifier 4 Filter offers you a high-quality three-layer high-efficiency filtration system to protect your health. The all-in-one powerful filter gives you layers of purification for a much cleaner air output. This filtration system consists of a primary filter, Xiaomi's high-efficiency filter and a high-quality activated carbon filter that work together to purify your air and keep you healthy. Designed purely for the Xiaomi Smart Air Purifier 4, this replacement filter helps bring new life into your Xiaomi Air Purifier.

The primary filter allows for 360° blocking of large particles. The primary filter provides an initial filtration by filtering dust, hair, fine crumbs among other large particles and is resistant to creases, oil, acids, alkalis and more to ensure long service life. Xiaomi's high-efficiency filter gives you up to 99.97% filtration of 0.3μm particles. The 22000cm² high-efficiency filter removes PM2.5, pollen etc. for consistent clean-air output. The high-quality impregnated activated carbon filter provides powerful odour adsorption. The 500000mg high-quality activated carbon filter, with the sophisticated pore structure and evenly distributed carbon, effectively removes air pollutants and odours that are harmful in your home.

By combining two filter technologies: Electrostatic charge and mechanical filtration, Xiaomi's high-efficiency filter media can remove 99.97% of airborne particles of 0.3 micrometres in size and traps dust, PM 2.5, pollen, pet dander, smoke and tiny particles. Compared to a conventional HEPA filter, Xiaomi's high-efficiency Filter allows the air purifier to generate less noise and consume less energy by allowing more air flow to pass through the filter all the while keeping the same cleaning efficiency.

FEATURES:

• Three-in-one Powerful Filter
• Primary, High-Efficiency and High-quality Activated Carbon Filter
• PM2.5 and Pollen Filtration
• Pet Hair Filtration
• Odour Elimination
• Designed for Xiaomi Smart Air Purifier 4 Only

SPECIFICATIONS:

• Compatibility: Xiaomi Smart Air Purifier 4 - BHR5096GL
• Product Dimensions: 21 x 21 x 29.3 cm
• Product Weight: 1100g

WHAT'S IN THE BOX:

• Xiaomi Smart Air Purifier 4 Filter - Grey x1
• Instruction Book x1

The Xiaomi Smart Air Purifier 4 Lite Filter offers you a high-quality three-layer high-efficiency filtration system to protect your health. The all-in-one powerful filter gives you layers of purification for a much cleaner air output. This filtration system consists of a primary filter, Xiaomi’s high-efficiency filter and a high-quality activated carbon filter that work together to purify your air and keep you healthy. Designed purely for the Xiaomi Smart Air Purifier 4 Lite, this replacement filter helps bring new life into your Xiaomi Air Purifier.

The primary filter allows for 360° blocking of large particles. The primary filter provides an initial filtration by filtering dust, hair, fine crumbs among other large particles and is resistant to creases, oil, acids, alkalis and more to ensure long service life. Xiaomi’s high-efficiency filter gives you up to 99.97% filtration of 0.3μm particles. The 22000cm² high-efficiency filter removes PM2.5, pollen etc. for consistent clean-air output. The high-quality impregnated activated carbon filter provides powerful odour adsorption. The 500000mg high-quality activated carbon filter, with the sophisticated pore structure and evenly distributed carbon, effectively removes air pollutants and odours that are harmful in your home.

By combining two filter technologies: Electrostatic charge and mechanical filtration, Xiaomi’s high-efficiency filter media can remove 99.97% of airborne particles of 0.1 micrometres in size and traps dust, PM 2.5, pollen, pet dander, smoke and tiny particles. Compared to a conventional HEPA filter, Xiaomi’s high-efficiency Filter allows the air purifier to generate less noise and consume less energy by allowing more airflow to pass through the filter all the while keeping the same cleaning efficiency.

FEATURES:

• Three-in-one Powerful Filter
• Primary, High-Efficiency and High-quality Activated Carbon Filter
• PM2.5 and Pollen Filtration
• Pet Hair Filtration
• Odour Elimination
• Designed for Xiaomi Smart Air Purifier 4 Lite Only

SPECIFICATIONS:

• Compatibility: Xiaomi Smart Air Purifier 4 Lite - BHR5274GL
• Product Dimensions: 20 x 20 x 31 cm

WHAT’S IN THE BOX:

• Xiaomi Smart Air Purifier 4 Lite Filter – Grey x1
• Instruction Book x1

The Xiaomi Mi Smart Standing Fan 2 Lite features smart control with support for the Mi Home app, Google Assistant and Amazon Alexa. This allows you to control the fan with your voice for a hands-free smart experience.

The Xiaomi Mi Smart Standing Fan 2 Lite features 7 customized fan blades that give you a powerful but gentle breeze. The three adjustable fan speed modes allow you to switch from sleep to normal modes. This can all be done in the Mi Home app, to achieve your desired airflow.

The Mi Smart Standing Fan 2 Lite uses a powerful 38W motor, which not only gives you more power but also more efficiency. Its powerful motor operates at a quiet noise level to give you as low as 37 dB(A). It also provides constant speed for more stable ventilation and lowers power consumption. To top it all off its blades produce long-range ventilation with a range of up to 16 meters.

The Fan is also very versatile, allowing for usage that is perfect for any room. Its widespread oscillation and adjustable tilt-back head allow it to blow air throughout the area effectively. Its innovative design allows you simply press a button to easily adjust the height of the stand. This allows you to place it on top of a table or on the floor for convenience.

FEATURES:

• Voice Control – Google Assistant, Mi Home and Alexa Support
• 7 Customizable Fan Blades
• DC Motor – Reducing Power Consumption
• 16m Range – Long-range Ventilation
• Adjustable Height
• Table and Floor – Place it Wherever You Like
• 90° Horizontal Swing
• Quiet Operation at 37dB(A)

SPECIFICATIONS:

• Air volume: 9~27 m³/h
• Airflow Distance: 16 Meters
• Operation noise: 38~58dB(A)
• Rated frequency: 50/60Hz
• Rated voltage: 220-230V~
• Rated power: 38W
• Horizontal swing angle: 90°
• Vertical swing angle: up 23°, down 16°
• Wireless connectivity: Wifi IEEE 802.11 b/g/n 2.4G Hz
• Product Dimensions: 34.3 × 33 × 64.2~100 cm
• Product Weight: 3500g

WHAT’S IN THE BOX:

• Xiaomi Mi Smart Standing Fan 2 Lite – White x1
• Motor and Upper Stand x1
• Lower Stand x1
• Base x1
• Fan Blade Assembly Knob x1
• Rear Grille Knob x1
• Allen Key x1
• Base Bolt x1
• Fan Grille Screw x1
• User Manual x1

The Xiaomi Mi Robot Vacuum Mop Pad is perfect for keeping your floors clean. The mop pad can be easily attached to the base of your Mi Robot Vacuum Mop. The pad itself is used during the cleaning process. After vacuuming, it allows water to pass onto the pad, which mops immediately after vacuuming in one motion. It is designed to be used with the Xiaomi Mi Robot Vacuum Mop, Mop 2, Mop 2C, and Mop 2 Pro+.

FEATURES:

• Rewashable Mop pad
• Fabric pad
• Keep floors clean
• Fits nicely underneath your vacuum
• Designed for the Xiaomi Mi Robot Vacuum-Mop / Mop 2 / Mop 2C / Mop 2 Pro+

SPECIFICATIONS:

• Material: Fabric
• Compatibility:
  • Xiaomi Mi Robot Vacuum Mop
  • Xiaomi Mi Robot Vacuum Mop 2
  • Xiaomi Mi Robot Vacuum Mop 2C
  • Xiaomi Mi Robot Vacuum Mop 2 Pro+

WHAT’S IN THE BOX:

• Xiaomi Mi Robot Vacuum Mop Pad - Mop / Mop 2 / Mop 2C / Mop 2 Pro+ x1

Extend the life of your Xiaomi Robot Vacuum with the Xiaomi Robot Vacuum Mop Brush. This accessory can be used to replace worn-out or damaged main brushes on your Xiaomi Robot Vacuum Mop. The brush itself is safe to use on many surfaces, thanks to its nylon bristles; it won’t scratch or damage your floor or furniture. It features a unique cylindrical design that can easily collect and clean dirt from the surface. For more durability, during usage, the brushes are made from a sturdy ABS material. It is designed to be used with the Xiaomi Robot Vacuum Mop, Mop 2, Mop 2C, Mop 2 Pro+, Mop 2 Ultra, and Mop X10.

FEATURES:

• Practical main brush for Xiaomi robotic vacuum cleaner
• Nylon brush, will not scratch the floor and furniture
• Unique cylindrical design
• ABS material, durable in use
• Allows for easy cleaning of surfaces
• Designed for the Xiaomi Mi Robot Vacuum Mop / Mop 2 / Mop 2C / Mop 2 Pro+ / Mop 2 Ultra / X10

SPECIFICATIONS:

• Material: ABS
• Colour: Orange
• Brush Type: Nylon
• Accessory Type: Main Brush
• Compatibility:
  • Xiaomi Robot Vacuum Mop
  • Xiaomi Robot Vacuum Mop 2
  • Xiaomi Robot Vacuum Mop 2C
  • Xiaomi Robot Vacuum Mop 2 Pro+
  • Xiaomi Robot Vacuum Mop 2 Ultra
  • Xiaomi Robot Vacuum Mop X10

WHAT’S IN THE BOX:

• Xiaomi Robot Vacuum Mop Brush - Mop / Mop 2 / Mop 2C / Mop 2 Pro+ / Mop 2 Ultra / X10 x1

The ASRock DeskMini USB2.0 Adapter Cable is a great way to expand your ASRock DeskMini X300W. Featuring an easy to install mount system for easily attaching to the inside of your case. The USB adapter cable features 2 x USB 2.0 ports to give you extra storage mobile storage options for your DeskMini X300W. The USB 2.0 ports are widely compatible with many devices allowing you to add more versatility to your DeskMini tower with less clutter as the adapter is installed internally in your chassis.

FEATURES:

• Ideal for expanding your DeskMini
• DeskMini USB2.0 header
• 2 x USB 2.0 ports
• DeskMini motherboard connection
• Mount with 2 screws
• Easy to install

SPECIFICATIONS:

• Interface:
• USB in (DeskMini Motherboard)
• 2 x USB 2.0 out (USB 2.0 Header)
• Colour: Black
• Mounting System: 2 x screw mounting holes

WHAT’S IN THE BOX:

• ASRock USB2.0 Adapter Cable x1

The ASRock DeskMini VESA Mount Kit allows you to attach your ASRock DeskMini X300 to any VESA compatible mount. This is perfect for connecting to wall mounts, monitors or articulating arms to create your ideal space. Perfect for saving space in your workspace, the VESA mount kit gives you the freedom to place your DeskMini in more areas than just on your desk. It supports VESA mount sizes of 75 x 75 mm and 100 x 100mm, making it ideal for most monitors in the workplace. It is also easy to install and comes with mounting screws included.

FEATURES:

• VESA Mount Kit
• Save space on your desk or workspace
• Easily mount your chassis on the back of your monitor
• Support for 75 mm and 100 mm sizes
• Easy to install
• Mounting screws included
• Designed for ASRock DeskMini X300 series

SPECIFICATIONS:

• Colour: Black
• VESA Mount Size:
  • 100 x 100 mm
  • 75 x 75 mm
• Compatibility:
• ASRock DeskMini X300
• Any monitor with 75 mm or 100 mm compatible VESA mount points

WHAT'S IN THE BOX:

• ASRock DeskMini VESA Mount Kit x1
• Mounting Screws x8

Get a stable and high-speed connection with the Cudy AC1200 Gigabit Dual Band Smart WiFi Router. With wireless speeds of up to 1.2Gbps and Gigabit LAN, the AC1200 Gigabit Dual Band Router provides a better experience for online gaming and HD video streaming.

It comes with the latest Wi-Fi standard 802.11ac streaming speeds and can run applications at triple the speed of the previous routers. The powerful dual-core CPU ensures smooth 4K UHD streaming to smart TVs, mobile devices and gaming consoles without Neck Scarfering. The high gain antennas boost the sensitivity of the router, allowing you to create connections over greater distances while providing powerful penetration through walls.

Featuring a dual-band network and 5 different modes for versatility, the AC1200 supports a 2.4GHz network band which provides extremely long-range coverage. It also supports a 5GHz network band that can reach up to 867Mbps making it ideal for gaming and 4K streaming.

With built-in PPTP / L2TP VPN Clients, this router can easily establish a connection to VPN Server to transport all your online data and traffic, securing it with its encryption at the same time. You can use this function to connect your home network with your work network or school network. You only need to configure the router once, and all the devices in the network can be connected.

Maintain high security across your network to help ensure your privacy is safe while online. For more security, you can use a Guest Network which separates access from your regular family network. Mac and IP Filtering can also help you block unwelcome clients, while firewall protection stops malicious packets from getting into your network.

FEATURES:

• AC1200 Dual-Band Wi-Fi Speed
• High-Performance Dual Core CPU
• 16MB Flash and 128MB DDR3
• 5 x Gigabit Ethernet Ports
• 4 x 5dBi High Gain Antennas
• VPN Clients and DDNS Support
• 5-IN-1 WiFi Router/ Mesh/Repeater/ WISP/ Access Point

SPECIFICATIONS:

• Processor: Dual-Core CPU
• Flash: 16MB
• DDR: 128MB
• Antenna: 4× Fixed Omni-Directional Antennas
• Interface:
  • 1× 1000/100/10 Mbps WAN Port
  • 4× 1000/100/10 Mbps LAN Ports
• Button: WPS Button, Reset Button
• External Power Supply: 12 V / 1 A
• Wireless Standards:
  • IEEE 802.11ac/n/a 5 GHz
  • IEEE 802.11n/b/g 2.4 GHz
• Frequency: 5 GHz, 2.4 GHz
• Signal Rate:
  • 867 Mbps (5 GHz), 300 Mbps (2.4 GHz)
  • Compatible with 802.11a/b/g/n/ac Wi-Fi standards
• Transmit Power:
  • CE: <20dBm(2.4 GHz), <23dBm(5.15 GHz~5.25 GHz)
  • FCC:<30dBm(2.4 GHz & 5.15 GHz~5.825 GHz)
• Wireless Modes:
• Enable/Disable Wireless Radio, WMM, WEP, WPA/WPA2
• Wireless Functions: WPA-PSK/WPA2-PSK
• WAN Type: Dynamic IP/Static IP/PPPoE
• Management:
  • Parental Control
  • Guest Network
• DHCP: Server, DHCP Client List, Address Reservation
• Dynamic DNS: Compatible with 15 more DDNS providers
• Guest Network:
  • 2.4 GHz guest network × 1
  • 5 GHz guest network × 1
• NAT: Port Forwarding, Port Triggering, UPnP, DMZ
• VPN Client: PPTP/L2TP/OpenVPN/WireGuard
• System Requirements:
  • Microsoft Windows 98SE/NT/2000/XP/Vista™/7/8/8.1/10, MAC OS, NetWare, UNIX or Linux
  • Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0, or other Java-enabled browser
  • Cable or DSL Modem
  • Subscription with an internet service provider (for internet access)
• Product Dimensions: 20.5 x 13.7 x 3.8 cm

WHAT'S IN THE BOX:

• Cudy AC1200 Gigabit Dual Band Smart WiFi Router - White x1
• Power Adapter x1
• RJ45 Ethernet Cable x1
• Quick Installation Guide

When you have the world’s most advanced processor architecture for gamers and content creators, the possibilities are endless. Whether you are playing the latest games, designing the next skyscraper, or crunching data, you need a powerful processor that can handle it all—and more. Hands down, the AMD Ryzen™ 5000 Series desktop processors set the bar for gamers and artists alike.

Whether gaming or creating, AMD Ryzen™ processors offer ultimate performance. AMD Ryzen™ 5000 Series processors power the next generation of demanding games, providing one-of-a-kind immersive experiences and dominating any multithreaded task like 3D and video rendering, and software compiling.

With great processing power comes bleeding-edge technologies to support it. All AMD Ryzen™ 5000 Series processors come with a full suite of technologies designed to elevate your PC’s processing power including Precision Boost 2, Precision Boost Overdrive 3, and PCIe® 4.0.

Not only are these processors drop-in ready on 500 series motherboards with a simple BIOS update, but you can also easily tweak and tune your processor with AMD “Zen 3” Core Architecture and AMD StoreMI.

FEATURES:

• Up to 4.2 GHz
• 6 Cores / 12 Threads
• AM4 Socket
• Included Wraith Stealth Cooler
• AMD StoreMI Technology
• AMD “Zen 3” Core Architecture
• AMD Ryzen™ VR-Ready Premium

SPECIFICATIONS:

• CPU Cores: 6
• Threads: 12
• Base Clock: 3.6 GHz
• Max Boost Clock: Up to 4.2 GHz
• Total L2 Cache: 3MB
• Total L3 Cache: 16MB
• Unlocked: Yes
• CMOS: TSMC 7nm FinFET
• Package: AM4
• PCI Express® Version: PCIe 3.0
• Default TDP / TDP: 65W

WHAT’S IN THE BOX:

• AMD Ryzen 5 5500 6-Core 3.6 GHz AM4 CPU – Grey x1
• AMD Wraith Stealth CPU Cooler x1

Work and play securely with the Cudy M1200 AC1200 Dual-Band Whole Home Mesh WiFi System. The Cudy M1200 seamlessly connects your entire home with reliable Wi-Fi. Finally, you can stream, surf, and game from anywhere. Say goodbye to dead spots and buffering without buying a brand new Wi-Fi ecosystem. The M1200 can help you create a more flexible and cost-effective network to cover your entire family.

With a built-in PPTP/L2TP/OpenVPN/WireGuard VPN Client, this router can easily establish a connection to the VPN server to transport all your online data and traffic. It can be easily configured to secure it with encryption and DNS over TLS at the same time to boost security.

FEATURES:

• AC1200 Mesh Wi-Fi Solution
• 867Mbps on 5GHz and 300Mbps on 2.4GHz
• Seamless Roaming, Whole Home Coverage
• 10/100Mbps Ethernet Ports+ 4 Internal Antennas
• MU-MIMO, Beamforming, IPv6
• PPTP/L2TP VPN clients and DDNS Support

SPECIFICATIONS:

• Hardware Features:
  • Processor: Dual-Core Processors
  • Flash: 128Mbit (16MB)
  • DDR: 1Gbit (128MB)
  • Antenna: 4× Internal Omni-Directional Antennas
  • Interface:
    • 1× 100/10 Mbps WAN Port
    • 1× 100/10 Mbps LAN Port
  • Button: Pair Button, Reset Button
  • External Power Supply: 12 V / 1 A
• Wireless Features:
  • Wireless Standards:
    • IEEE 802.11/ac/n/a 5 GHz
    • IEEE 802.11/n/b/g 2.4 GHz
  • Frequency: 5 GHz, 2.4 GHz
  • Signal Rate
    • 867 Mbps (5 GHz),300 Mbps (2.4 GHz)
    • Compatible with 802.11a/b/g/n/ac Wi-Fi standards
  • Transmit Power
    • CE: <20dBm(2.4 GHz), <23dBm(5.15 GHz~5.25 GHz)
    • FCC: <30dBm(2.4 GHz & 5.15 GHz~5.825 GHz)
  • Wireless Modes
    • Enable/Disable Wireless Radio, WMM, WEP, WPA/WPA2
  • Wireless Functions: WPA-PSK/WPA2-PSK
• Software Features
  • WAN Type: Dynamic IP/Static IP/PPPoE
  • Management:
    • Parental Control
    • Guest Network
  • DHCP: Server, DHCP Client List, Address Reservation
  • Dynamic DNS: Compatible with 15 more DDNS providers
  • Guest Network
    • 2.4 GHz guest network × 1
    • 5 GHz guest network × 1
  • NAT: Port Forwarding, Port Triggering, UPnP, DMZ
  • VPN Client: PPTP/L2TP/OpenVPN/WireGuard
• System Requirements:
  • Microsoft Windows 98SE/NT/2000/XP/Vista™/7/8/8.1/10, MAC OS, NetWare, UNIX or Linux
  • Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0, or other Java-enabled browser
  • Cable or DSL Modem
  • Subscription with an internet service provider (for internet access)

WHAT’S IN THE BOX:

• Cudy M1200 AC1200 Dual-Band Whole Home Mesh WiFi Router – White x2
• Power Adapter x2
• RJ45 Ethernet Cable x 1
• Quick Installation Guide x1

[embed]https://www.youtube.com/watch?v=7dlYxQd_-Ek[/embed]

Free from the restrictions of power cords and plug sockets, the Xiaomi Smart Standing Fan 2 Pro provides a refreshing natural breeze whenever and wherever you need it. The built-in 33.6Wh lithium-ion battery pack and 12V low voltage design will ensure you can enjoy the cool breeze even during an unexpected power outage. Its adjustable wide-angle ventilation offers airflow for up to a maximum distance of 14 metres, letting you cool the whole room more efficiently.

Compared with traditional fan blades, the 7+5 double-layer wing-shaped blade of Xiaomi Smart Standing Fan 2 Pro can generate a much softer breeze for your comfort. The inner-layer and outer-layer fan blades each generate airflow at a different speed, which effectively eliminates any air vortex, resulting in a wider, softer and more comfortable natural breeze. The design of double-layer fan blades enables the inner-layer blades to disrupt the focused air flow generated by the outer layer blades, making the ventilation wider and more gentle, while bringing you an even better experience than the breeze you find in nature.

In addition to the traditional control buttons on the top, the fan supports voice control, letting you remotely control the Fan 2 Pro via the Mi Home/Xiaomi Home app, as well as smart interaction with other Xiaomi smart home devices. For additional protection, the magnetic charging dock is equipped with overcharge protection. This allows it to automatically stop charging once the battery is fully charged.

FEATURES:

• Voice Control – Google Assistant, Mi Home and Alexa Support
• 7+5 Double-layer Fan Blades
• BLDC Motor – Reducing Power Consumption
• 1000 Precise Speed Settings
• 140° Ultra-wide Horizontal Swing
• Adjustable Height
• Charging Indicator
• Table and Floor – Place it Wherever You Like
• Ultra-quiet Operation

SPECIFICATIONS:

• Type: Standing Fan
• Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4GHz
• Rated Voltage: 12V
• Rated Power: 24W
• Noise Emission: ≤58 db(A)
• Battery Type: Rechargeable Li-ion Battery
• Battery Capacity: 2800 mAh(33.6 Wh)
• Limited Charging Voltage: 0.8V
• Maximum Fan Flow Rate: 20.28 m³/min
• Fan Power Input: 12.7W
• Service Value: 1.60(m³/min)/W
• Maximum Air Velocity: 3.47 meters/sec
• Measurement Standard for Service Value: EN IEC 60879: 2019
• Standby Power Consumption:
  • Without Wi-Fi Connection: 0.216 W
  • With Wi-Fi Connection: 0.391 W
• Fan Sound Power Level: 56.3 dB(A)
• Product Dimensions: 34.3 × 33 × 100 cm
• Product Weight: 3200g

WHAT'S IN THE BOX:

• Xiaomi Smart Standing Fan 2 Pro - White x1
• Motor and Upper Stand x1
• Lower Stand x1
• Fan Base x1
• Fan Blade Assembly Knob x1
• Rear Grille Knob x1
• Allen Key x1
• Charging Base x1
• Fan Grille Screw x1
• User Manual x1

Built in with the latest Bluetooth 5.2 technology, the Cudy AX5400 Tri-Band Wi-Fi 6 PCI Express Adapter can achieve 2× faster speed and 4× broader coverage than on Bluetooth 4.2. Easily connect as many devices as you want, including game controllers, headphones, and keyboards, to enjoy a smoother experience than ever before. Everyone knows that lower latency is essential to gaming success. The revolutionary OFDMA reduces lag by up to 75% to increase your response time. Enjoy ultra-responsive real-time gaming and immersive VR experiences.

Combined with the AX210 WiFi 6/6E card, the Cudy AX5400 Tri-Band Wi-Fi 6 PCI Express Adapter brings faster and clearer Wi-Fi to fully unlock the potential of your Wi-Fi 6/6E router. Its Tri-Band network support offers great options for various speeds. 2.4GHz provides a maximum speed of 574Mbps and is extremely long-range, while the 5GHz/6GHz bands reach 2402Mbps maximum speeds, making it ideal for gaming and 4K streaming. The Cudy AX5400 is fully compatible with 802.11ax/ac/a/b/g/n routers.

The Cudy AX5400 uses WPA3 which provides more secure and individualized encryption in personal password safety, protecting your network from wireless hacking. This allows you to always keep your network safe while gaming online.

FEATURES:

• Tri-Band 2402Mbps + 2402Mbps + 574Mbps Speed
• AX210 Module Inside
• Bluetooth 5.2 Technology
• Intel WiFi 6/WiFi6E Module Inside
• Compatible with 802.11ax/ac/a/b/g/n
• WPA3 Advanced Security
• Windows 10 and 11 64 bit compatible only

SPECIFICATIONS:

• Model: WE3000S
• Chipset: INTEL AX210
• Standards: IEEE802.11.ax, IEEE802.11.ac, IEEE802.11.n, IEEE802.11.b, IEEE802.11.g, IEEE802.11.a
• Data rate:
  • 2.4G:574Mps
  • 5G:2400Mbps
  • 6G:2400Mbps
• Interface: PCI Express 1x slot and USB
• BT: 5.2
• Antenna: 2*3dBi removable omnidirectional antennas
• Antenna: 2*5dBi un-fixed
• Support OS:
  • Windows®10/11(64bit)
  • Mac OS® 10.x (Intel-based, tested up to 10.9)
  • Linux 2.4.x and later (Tested up to 3.5)
• Environment:
  • Operating Temperature: 0°C-70°C
  • Relative Humidity: 10%-90%(non-condensing)
  • Storage Temperature: -10°C-80°C
  • Relative Humidity: 5%-90%(non-condensing)
• Product Dimensions: 6.5 x 4.5 x 0.2 cm

WHAT'S IN THE BOX:

• Cudy AX5400 Tri-Band Wi-Fi 6 PCI Express Adapter x1
• 5dBi High Gain Antennas x2
• Low-Profile Bracket x1
• Bluetooth Header Cable x1
• Quick Installation Guide x1
• Drivers Disk x1

With the WINX POWER Fast 52W Car Charger, you can charge up to 2 devices simultaneously whilst you're on the move in your car. This device features intelligent protective safeguards that help ensure stable quick charge times for compatible devices via its dual USB ports (1x USB and 1x Type-C). Thanks to an ultra-compact, sleek design the WINX Power Fast 52W Car Charger never gets in the way.

The device also features a functional blue LED indicator. With the WINX Power Fast 52W Car Charger, you'll always have a reliable, yet powerful charger to keep your devices going during your travels.

FEATURES:

• 52W Max Output
• Simultaneously charge two devices
• Charge your tablets, mobile phones, & handheld gaming devices*
• Dual output ports (1x USB & 1x Type-C)
• Ultra-compact, space-saving design
• Blue LED Indicator

SPECIFICATIONS:

• Input: 12-24V
• Output Type-C 1 (PD) | 30W: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A
• Output USB 1 (QC) | 22W: 5V/3A, 9V/2A, 12V/1.5A, 5V/4.5A
• PPS: 3.3-5.9/V3A, 3.3-11V/3A
• Product dimensions: 6.07 x 3.07 x 2.37cm
• Product weight: 28g

WHAT'S IN THE BOX:

• WINX POWER Fast 52W Car Charger x1
• User Manual x1

*Device power requirements need to be 52W or less.

The Cudy POE400 90W Gigabit PoE/PoE+/PoE++ Injector is a great way to provide power over ethernet to all your compatible network and IP devices. It works well with various devices including IP cameras for home, office and small businesses, VOIP phones for business conferences, and WiFi Access Points for office and business. The POE400 is very versatile and can be easily mounted on the wall.

FEATURES:

• Full IEEE 802.3af IEEE 802.3at, IEEE802.3bt Compliant
• Up to 90W of Power on 4-pairs
• Auto-detect of POE IEEE 802.3af IEEE 802.3at, IEEE802.3bt equipment
• Supports 10/100/1000Base-T applications
• LED indicators power input indication
• Distance up to 100 meters
• Internal AC/DC converter – no need for external power modules
• Easy plug-and-play installation
• Surge protection

SPECIFICATIONS:

• No. of channels: 1
• Pass-Through Data Rates: 10/100/1000Mbps
• Power over Ethernet Output:
  • Pin Assignment and Polarity: 1/2 (-), 3/6 (+),4/5 (+), 7/8 (-),
  • Output Power Voltage: 56Vdc
  • User Port Power: 90W
• Input Power Requirements:
  • AC Input Voltage: 100 to 240 VAC
  • AC Input Current: 1A 100-240 VAC
  • AC Frequency: 50 to 60 Hz
• Indicators:
  • System Indicator: AC Power
  • User Indicator: Channel Power
• Connectors: Shielded RJ-45, EIA 568A and 568B
• Protection:
  • Over-current protection
  • Over-load protection
  • Over-voltage protection
  • Anti-interference protection
• Regulatory Compliance:
  • IEEE 802.3af (15.4W)
  • IEEE 802.3at (30W)
  • IEEE802.3bt (90W)
• Environmental Conditions
  • Operating Ambient Temperature:0 to 45℃
  • Operating Humidity: Maximum 80%, Non-condensing
  • Storage Temperature:-20 to 70℃
  • Storage Humidity: Maximum 80%, Non-condensing
• Product Dimensions: 17.8 x 8 x 4.6 cm

WHAT'S IN THE BOX:

• Cudy POE400 90W Gigabit PoE/PoE+/PoE++ Injector - Black x1